Gray cast iron is a type of cast iron which has a flakes graphite forms that have vibration damping properties, as well as good mechanical properties, so this material is widely used in various types of equipment and structures. Addition of necessary elements is one way to improve the mechanical properties of gray cast iron. Giving the portion of copper can increase the formation of graphite on eutectic transformation but reduce the formation of graphite on eutectoid transformation, thereby increasing the amount of pearlite. The results of the SEM (Scanning Electron Microscope) test showed an increased number of pearlites, followed by increasingly interlamellar spacing. Denser interlamellar spacing is obtained by increasing the percentage of a copper element in gray cast iron. The results of tensile testing conducted in this study also showed that an increase in the percentage of copper is able to increase the tensile strength. So, it can be concluded that an increase in the portion of the amount of copper element produces closer interlamellar spacing and increases thereby its tensile strength.
Penelitian ini dilakukan pada material besi cor nodular 700 yang memiliki fasa ledeburitik. Besi cor nodular 700 fasa ledeburitik memiliki kekerasan dan struktur mikro yang tidak sesuai ISO 1083. Untuk memperbaiki nilai kekerasan dan struktur mikro dilakukan proses perlakuan panas. Perlakuan panas yang dilakukan menghilangkan fasa ledeburuit pada temperatur austenisasi, kemudian didinginkan menggunakan media pendinginan yang bervariasi. Hasil variasi media pendingian dilanjutkan dengan proses tempering. Hasil perlakuan panas tersebut dilakukan pengujian kekerasan dan struktur mikro. Hasil pengujian menunjukan proses pendinginan media udara bebas dan dilanjutkan temper 550 0C menghasilkan nilai kekerasan dan struktur mikro sesuai ISO 1083.
Selama lebih dari setengah abad, dalam proses industri yang menuntut ketahanan abrasi yang tinggi. Biaya pembuatan yang murah dan kateristik material yang baik membuat pembangkit listrik, semen, keramik, cat, batu sebagai grinding balls, mill liners, pulverizer rings wearbacks dan metalworking rolls. proses pengecoran, untuk mencapai kekerasan yang di temperatur rendah, hal ini dilakukan untuk menghindari perubahan sifat serta koefesien muai yang berbeda dari dua bahan yang berbeda
Dinamika Teknik MesinPengaruh temperatur terhadap struktur mikro dan sifat mekanik dalam proses menggunakan CuZn 35 sebagai logam pengisi.
<p>Tujuan dari penelitian ini adalah untuk meningkatkan efektifitas pembersihan <em>slag </em>pada proses peleburan besi cor. Penelitian ini menghasilkan perhitungan kecepatan terminal slag muncul ke permukaan tanur induksi berdasarkan pendekatan Hukum Stokes pada masing-masing slag yang muncul saat proses peleburan besi cor. Setiap pengecoran besi cor diambil tiga buah sampel berdasarkan waktu tercepat pada slag yang sangat ringan, waktu terlambat yang dimiliki oleh slag terberat dan waktu ekstrem sebagai pembanding. Hasil dari setiap sampel dilakukan pengujian karakterisasi seperti bentuk, ukuran dan komposisi kimia pada setiap sampel yang kemudian disesuaikan dengan perhitungan yang telah dibuat. Karakterisasi dianalisa dengan menggunakan X-ray diffraction, Scanning micrsocope elektro dan energy dispersive spectroscopy micro analysis. Hasil menunjukkan bahwa pendekatan hukum stokes untuk memprediksi slag mencapai permukaan mendapatkan hasil yang sesuai bahwa seluruh slag mencapai permukaan pada waktu t = 230 s. Slag yang muncul pada waktu t = 300 s merupakan slag yang terbentuk akibat interaksi cairan dengan permukaan yang bukan merupakan slag yang terjadi dari raw material yang digunakan. Penelitian ini berhasil untuk meminimalisir terbentuknya slag pada setiap pengecoran besi cor menggunakan tanur induksi.</p>
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.