No abstract

No abstract

No abstract

Highly aligned, 2-3 wall carbon nanotube (CNT) arrays were used to examine the kinetics of CNT growth. A growth interruption method was used to determine the in situ growth rate. The growth interruption method with a water vapor treatment or acetylene treatment during the interruption enabled the production of CNT stacks with different morphologies. The catalytic activity was also monitored using this method. The lifetime of the catalyst was predicted and verified using the catalyst decay model. High temperature metal oxidation behavior using parabolic curve fitting is assigned to the decay process. Details of the analysis are presented.

The higher surface area of selectively grown multiwall carbon nanotubes (MWCNTs) and the better proximity of the reactant species in in situ microemulsion polymerization were used to attach the polystyrene (PS) nanoparticles to the outer wall of MWCNTs. Attachment were achieved by replacing surfactant with PS nanoparticles. SEM showed that the MWCNTs and PS nanoparticles were distributed in the composite. High resolution transmission electron microscopy showed successful anchoring of PS nanoparticles to the outer wall of the MWCNTs. In addition, anchoring enhanced the Raman's G/D ratio of the MWCNT and degradation temperature in PS nanoparticles. A mechanism of attachment of PS nanoparticles on the outer wall of MWCNT was proposed. The modified MWCNTs exhibited good durability and dispersability in different organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1523–1529, 2009