No abstract

The strive towards ever increasing automotive engine efficiencies for both diesel and gasoline engines has in recent years been forced by ever-stringent emissions regulations, as well as the introduction of fuel consumption regulations. The untapped availability of waste heat in the internal combustion engine (ICE) exhaust and coolant systems has become a very attractive focus of research attention by industry and academia alike. Even state of the art diesel engines operating at their optimum lose approximately 50% of their fuel energy in the form of heat. As a result, waste heat recovery (WHR) systems have gained popularity as they can deliver a reduction in fuel consumption and associated CO2 emissions. Of these, the Organic Rankine Cycle (ORC) is a well matured waste heat recovery technology that can be applied in vehicle powertrains, mainly due to the low additional exhaust backpressure on the engine and the potential opportunity to utilize various engine waste heat sources. ORCs have attracted high interest again recently but without commercial exploitation as of today due to the significant on-cost they represent to the engine and vehicle. In ORCs, expansion machines are the interface where useable power production takes place; therefore, selection of the expander technology is directly related to the thermal efficiency of the system. Moreover, the cost of the expander-generator units accounts for the largest proportion of the total cost. Therefore, selection of the most appropriate expander is of great importance at the early stage of any automotive powertrain project. This study aims to review the relevant research studies for expansion machines in ORC-ICE applications, analyzing the effects of specific speed on expander selection, exploring the operational characteristics of each expander to further assist in the selection of the most appropriate expander, and comparing the costs of various expanders based on publically available data and correlations.

No abstract

No abstract

The increasing number of passenger cars worldwide and the consequent increasing rate of global oil consumption have raised the attention on fuel prices and have caused serious problems to the environment. Nowadays, the demand for reducing fuel consumption and pollutant emissions has paved the way to the development of more efficient power generation systems for the transportation sector. The lower fuel burning and pollutant emissions of hybrid electric vehicles give a strong motivation and encourage further investigations in this field. This research aims to investigate novel configurations, which could achieve further performance benefits for vehicle powertrain. Automakers claim that the employment of a gas turbine operating as range extender in a series hybrid configuration is the most efficiency solution in the coming years. In particular, a Micro Gas Turbine (MGT) can be considered as an alternative to the internal combustion engine (ICE) as a range extender for electric vehicles. The MGT produces less raw exhaust gaseous emissions such as HC and CO and static applications compared to the ICE. In addition, the MGT weight is lower than an equivalent ICE and potentially can reduce the level of CO2 especially in a vehicle application. This study presents a parametric study of MGT applications for Range-Extended Electric Vehicle (REEV). The main objective is to examine the MGT performance to meet the requirements for a REEV that could become competitive, in terms of fuel consumption and pollutant emissions, to equivalent diesel or gasoline hybrid propulsion units or to conventional diesel vehicle.

No abstract

This study examines the implementation of a waste heat recovery system on an electric hybrid vehicle. The selected waste heat recovery method operates on organic Rankine cycle principles to target the overall fuel consumption improvement of the internal combustion engine element of a hybrid powertrain. This study examines the operational principle of hybrid electric vehicles, in which the internal combustion engines operates with an electric powertrain layout (electric motors/generators and batteries) as an integral part of the powertrain architecture. A critical evaluation of the performance of the integrated powertrain is presented in this paper whereby vehicle performance is presented through three different driving cycle tests, offering a clear assessment of how this advanced powertrain configuration would benefit under several different, but relevant, driving scenarios. The driving cycles tested highlighted areas where the driver could exploit the full potential of the hybrid powertrain operational modes in order to further reduce fuel consumption.

This paper presents a detailed design methodology of high pressure ratio radial inflow turbines integrated in Organic Rankine Cycles. The methodology is coupled with an optimization algorithm to optimize the input parameters specified by the designer. Moreover, a Design of Experiment technique is coupled to the design methodology to study the effect of each individual input parameter on the turbine performance. In addition, RefProP is implemented in the design methodology in order to account for the thermodynamic properties at the inlet and exit of each turbine stage. The maximum deviation between the current model and the test case was in the prediction of the rotor exit tip radius 5 (which was used as input parameter in the test case) with a value of 5.38%. In addition, the model demonstrated the ability to optimize any existing radial inflow turbine. Based on the steady-state cycle simulation, a radial inflow turbine with a pressure ratio of 7 was designed for an automotive application and demonstrated a total-to-static efficiency and power output of 74.4% and 13.6 kW, respectively, for a 200kW-class engine.