pi-Conjugated molecules are interesting components to prepare fluorescent nanoparticles. From the use of polymer chains that form small aggregates in water to the self-assembly of small chromophoric segments into highly ordered structures, the preparation of these materials allows to develop systems with applications as sensors or biolabels. The potential functionalization of the nanoparticles can lead to specific probing. This progress report describes the recent advances in the preparation of such emittive organic nanoparticles.

(IR), here defined as light with wavelengths between 700 nm and 2500 nm, accounts for around 50% of the total energy emitted by the sun reaching Earth (Figure 1b), [3,4] and this light produces interior heating but is invisible to the unaided eye.The absorption of sunlight by building materials and passage of IR through transparent surfaces such as windows is responsible for much of the interior overheating of office rooms, automobile interiors, greenhouses, and other similar spaces. The use of artificial cooling and heating systems will only increase with the continued influence of global climate change, with energy used for cooling systems surpassing energy used for heating around the year 2070, and a 40 fold increase in air cooling energy use is expected by 2100. [5] By controlling the influx of radiant heat transfer, calculations show that more than 50% of the energy used in lighting, heating and cooling could be saved by deploying better control systems over only 18% of available window stock. [6] In areas with human inhabitants employing windows, more aspects must be considered than simply reducing the use of energy in the room: any switchable window used in, for example, a commercial office space has several other requirements that must be met before it may be installed. Among these requirement are reasonably fast switching speeds [7] (although for IR control, relatively longer times compared to visible light switching should be acceptable), good optical transparency with minimum haze, an acceptable device lifetime, [8] and functionality over a range of exterior temperatures. Controlling the excess of solar energy without compromising the visible transparency of the window is an important consideration for human health: maintaining inside/outside contact and daylighting are vital in retaining well-being and productivity, as well as providing economic and aesthetic gain by reducing the need for artificial lighting systems. [9,10] These are challenging goals for a window to realize.A number of materials have been developed over the past few decades to maintain indoor temperatures. Many of these focus on the opaque structural building elements like walls and roofing. [10][11][12][13] Other solutions target the transparent window, employing external mechanical shutters and blinds, [14] phase change materials (PCMs), [15] thermochromic materials, [16] aerogels, [17] trapped gas in fluid membranes, [18] and even phononic materials, [19] among other options. Indeed, controlling heat passage through the window in response to changing climate conditions is a great challenge; ideally, one would accomplish Windows are vital elements in the built environment that have a large impact on the energy consumption in indoor spaces, affecting heating and cooling and artificial lighting requirements. Moreover, they play an important role in sustaining human health and well-being. In this review, we discuss the next generation of smart windows based on organic materials which can change their properties by reflecting or trans...

Current developments in the field of thermotropic chiral-nematic liquid crystals as sensors are discussed. These one dimensional photonic materials are based on low molecular weight liquid crystals and chiralnematic polymeric networks. For both low molecular weight LCs and polymer networks, real-time and time integrating sensors have been realized. The response mechanism is either based on a change of helical twisting power of the dopant upon exposure to an analyte, or due to physical swelling, with a change of order in the liquid crystalline phase upon uptake of the analyte, causing the pitch to change.Sensors that respond to organic and water vapour, amines, water CO 2 , O 2 , metal ions, pH, strain and temperature have been reported.

Light--responsive hydrogel valves with enhanced response characteristics compatible with microfluidics have been obtained by optimization of molecular design of spiropyran photoswitches and gel composition. Self--protonating gel formulations were exploited, wherein acrylic acid was copolymerized in the hydrogel network as an internal proton do--nor, to achieve a swollen state of the hydrogel in water at neutral pH. Light--responsive properties were endowed upon the hydrogels by copolymerization of spiropyran chromophores, using electron withdrawing and donating groups to tune the gel--swelling rate. Faster macroscopic swelling of the hydrogels was obtained by changing an ester to an ether at the 6' position (factor of 4) or shifting the ether group to the 8' position of the spiropyran (factor of 2.5) producing a 10 fold increase in total. The effect was also visible in the swelling behavior of the corresponding hydrogel valves, where the ob--served macroscopic changes were reversible and reproducible and in agreement with the molecular kinetics. Gel--valves integrated within microfluidic channels have been fabricated and allow reversible and repeatable operation, with opening of the valve effected in 1 minute, while closing takes around 5.5 minutes.

An optical calcium sensor is fabricated based on a cholesteric liquid crystalline (CLC) polymer containing benzoic acid metal binding sites. A chiral imprinted CLC polymer is made which is subsequently treated with KOH to yield a responsive green reflecting film. On investigation of various metal ions, the polymer film shows a high optical response, and selectivity for calcium ions, which is related to the preorganized binding sites in the ordered liquid crystalline phase, leading to a blue reflecting film. The photonic polymer film is sensitive to Ca2+ within the physiologically relevant concentration range of 10−4 to 10−2 m. Measurement of total calcium concentration in serum is also investigated using the film. The optical responses of normal serum and samples mimicking hypocalcemia and hypercalcemia can be clearly distinguished, providing a cheap, battery‐free, and easy‐to‐use alternative for calcium determination in clinical diagnostics.