No abstract

No abstract

A magnetic multi-walled carbon nanotube/zeolite nanocomposite was applied for the adsorption and removal of arsenic ions in simulated and real acid mine drainage samples. The adsorption mechanism was investigated using two-parameter (Langmuir, Freundlich, Temkin) and three-parameter (Redlich–Peterson, and Sips) isotherm models. This was done in order to determine the characteristic parameters of the adsorptive removal process. The results showed that the removal process was described by both mono- and multilayer adsorptions. Adsorption studies demonstrated that a multi-walled carbon nanotube/zeolite nanocomposite could efficiently remove arsenic in simulated samples within 35 min. Based on the Langmuir isotherm, the adsorption capacity for arsenic was found to be 28 mg g−1. The nanocomposite was easily separated from the sample solution using an external magnet and the regeneration was achieved by washing the adsorbent with 0.05 mol L−1 hydrochloric acid solution. Moreover, the nanoadsorbent was reusable for at least 10 cycles of adsorption-desorption with no significant decrease in the adsorption capacity. The nanoadsorbent was also used for the arsenic removal from acid mine drainage. Overall, the adsorbent displayed excellent reusability and stability; thus, they are promising nanoadsorbents for the removal of arsenic from acid mine drainage.

In this study, Fe3O4-ZrO2 functionalized with 3-aminopropyltriethoxysilane (Fe3O4-ZrO2@APS) nanocomposite was investigated as a nanoadsorbent for the removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions from aqueous solution and real samples in batch mode systems. The prepared magnetic nanomaterials were characterized using X-ray powder diffraction (XRD), scanning electron microscopy/energy dispersion x-ray (SEM/EDX) Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). Factors (such as adsorbent dose and sample pH) affecting the adsorption behavior of the removal process were studied using the response surface methodology. Under optimized condition, equilibrium data obtained were fitted into the Langmuir and Freundlich isotherms and the data fitted well with Langmuir isotherms. Langmuir adsorption capacities (mg/g) were found to be 113, 111, 128, and 123 mg/g for Cd, Cu, Ni and Mn, respectively. In addition, the adsorption kinetics was analyzed using five kinetic models, pseudo-first order, pseudo-second order, intraparticle diffusion and Boyd models. The adsorbent was successfully applied for removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions in wastewater samples.