Owing to their extraordinary physical and chemical properties, two-dimensional (2D) materials have aroused extensive attention and have been widely used in photonic and optoelectronic devices, catalytic reactions, and biomedicine. In particular, 2D materials possess a unique bandgap structure and nonlinear optical properties, which can be used as saturable absorbers in ultrafast lasers. Here, we mainly review the top-down and bottom-up methods for preparing 2D materials, such as graphene, topological insulators, transition metal dichalcogenides, black phosphorus, and MXenes. Then, we focus on the ultrafast applications of 2D materials at the typical operating wavelengths of 1, 1.5, 2, and 3 μm. The key parameters and output performance of ultrafast pulsed lasers based on 2D materials are discussed. Furthermore, an outlook regarding the fabrication methods and the development of 2D materials in ultrafast photonics is also presented.

The rapid expansion of nanotechnology and material science prompts two-dimensional (2D) materials to be extensively used in biomedicine, optoelectronic devices, and ultrafast photonics. Owing to the broadband operation, ultrafast recovery time, and saturable absorption properties, 2D materials become the promising candidates for being saturable absorbers in ultrafast pulsed lasers. In recent years, the novel 2D MXene materials have occupied the forefront due to their superior optical and electronic, as well as mechanical and chemical properties. Herein, we introduce the fabrication methods of MXenes, incorporation methods of combining 2D materials with laser cavities, and applications of ultrafast pulsed lasers based on MXenes. Firstly, top-down and bottom-up approaches are two types of fabrication methods, where top-down way mainly contains acid etching and the chief way of bottom-up method is chemical vapor deposition. In addition to these two typical ones, other methods are also discussed. Then we summarize the advantages and drawbacks of these approaches. Besides, commonly used incorporation methods, such as sandwich structure, optical deposition, as well as coupling with D-shaped, tapered, and photonic crystal fibers are reviewed. We also discuss their merits, defects, and conditions of selecting different methods. Moreover, we introduce the state of the art of ultrafast pulsed lasers based on MXenes at different wavelengths and highlight some excellent output performance. Ultimately, the outlook for improving fabrication methods and applications of MXene-based ultrafast lasers is presented.

The development of rapid and dependable proton transport channels is crucial for proton exchange membrane fuel cells (PEMFCs) operating in low humidity conditions. Herein, an NH-Zr framework rich in basic sites was in situ constructed in a per uorosulfonic acid (PFSA) solution, and PFSA-NH-Zr hybrid proton exchange membranes were prepared. The introduced NH-Zr framework successfully induced proton conducting groups (-SO 3 H) reorganization along the NH-Zr framework, resulting in the formation of fast ion transport channels. Meanwhile, under low humidity, the acid-base pairs between N-H (NH-Zr framework) and -SO 3 H (PFSA) promoted the protonation/deprotonation and the subsequent proton leap via the Grotthuss processes. Especially, the hybrid membrane PFSA-NH-Zr-1 with suitable NH-Zr content had a promising proton conductivity of 0.031 S/cm at 80°C, 40% RH, and 0.292 S/cm at 80°C, 100% RH, which were approximately 33% and 40% higher than the pristine PFSA membrane (0.023 S/cm and 0.209 S/cm), respectively. In addition, the maximum power density of the hybrid proton exchange membrane was 0.726 W/cm 2 , which was nearly 20% higher than the pristine PFSA membrane (0.604 W/cm 2 ) under 80°C, 40% RH. This work established a referable strategy for developing high-performance proton exchange membranes under low RH conditions.

No abstract