Microbially induced corrosion (MIC) is a complex problem that affects various industries. Several techniques have been developed to monitor corrosion and elucidate corrosion mechanisms, including microbiological processes that induce metal deterioration. We used zero resistance ammetry (ZRA) in a split chamber configuration to evaluate the effects of the facultatively anaerobic Fe(III) reducing bacterium Shewanella oneidensis MR-1 on the corrosion of UNS G10180 carbon steel. We show that activities of S. oneidensis inhibit corrosion of steel with which that organism has direct contact. However, when a carbon steel coupon in contact with S. oneidensis was electrically connected to a second coupon that was free of biofilm (in separate chambers of the split chamber assembly), ZRA-based measurements indicated that current moved from the S. oneidensis-containing chamber to the cell-free chamber. This electron transfer enhanced the O2 reduction reaction on the coupon deployed in the cell free chamber, and consequently, enhanced oxidation and corrosion of that electrode. Our results illustrate a novel mechanism for MIC in cases where metal surfaces are heterogeneously covered by biofilms.

Despite observations of steel corrosion in nitrate-reducing environments, processes of nitrate-dependent microbially influenced corrosion (MIC) remain poorly understood and difficult to identify. We evaluated carbon steel corrosion by MR-1 under nitrate-reducing conditions using a split-chamber/zero-resistance ammetry (ZRA) technique. This approach entails the deployment of two metal (carbon steel 1018 in this case) electrodes into separate chambers of an electrochemical split-chamber unit, where the microbiology or chemistry of the chambers can be manipulated. This approach mimics the conditions of heterogeneous metal coverage that can lead to uniform and pitting corrosion. The current between working electrode 1 (WE1) and WE2 can be used to determine rates, mechanisms, and, we now show, extents of corrosion. When was incubated in the WE1 chamber with lactate under nitrate-reducing conditions, nitrite transiently accumulated, and electron transfer from WE2 to WE1 occurred as long as nitrite was present. Nitrite in the WE1 chamber (without ) induced electron transfer in the same direction, indicating that nitrite cathodically protected WE1 and accelerated the corrosion of WE2. When was incubated in the WE1 chamber without an electron donor, nitrate reduction proceeded, and electron transfer from WE2 to WE1 also occurred, indicating that the microorganism could use the carbon steel electrode as an electron donor for nitrate reduction. Our results indicate that under nitrate-reducing conditions, uniform and pitting carbon steel corrosion can occur due to nitrite accumulation and the use of steel-Fe(0) as an electron donor, but conditions of sustained nitrite accumulation can lead to more-aggressive corrosive conditions. Microbially influenced corrosion (MIC) causes damage to metals and metal alloys that is estimated to cost over $100 million/year in the United States for prevention, mitigation, and repair. While MIC occurs in a variety of settings and by a variety of organisms, the mechanisms by which microorganisms cause this damage remain unclear. Steel pipe and equipment may be exposed to nitrate, especially in oil and gas production, where this compound is used for corrosion and "souring" control. In this paper, we show uniform and pitting MIC under nitrate-reducing conditions and that a major mechanism by which it occurs is via the heterogeneous cathodic protection of metal surfaces by nitrite as well as by the microbial oxidation of steel-Fe(0).

No abstract

Microbially influenced corrosion (MIC) is a common problem in biodiesel storage tanks. Here, thick microbial growths develop at and span aqueous/non-aqueous fluid interfaces. MIC in this setting was investigated in experiments using zero-resistance ammetry (ZRA) measurements. To mimic the water–fuel interface, one carbon steel coupon was deployed in B20 biodiesel and one carbon steel coupon was deployed in medium mimicking storage tank sump water, and current between the two coupons was measured. ZRA incubations were inoculated with fungi isolated from contaminated B20 biodiesel storage tanks. Corrosion on both coupons was the greatest in incubations with a fungus whose filaments penetrated the diesel fuel layer, while organisms that did not explore the fuel induced corrosion only on the coupon immersed in water and not on the coupon immersed in the fuel. Subsequent ZRA experiments indicated that current between steel coupons was only achieved when fungal hyphae penetrated the non-aqueous layer, and this resulted in the most extensive corrosion of the coupons. We call this corrosion aqueous/non-aqueous interfacial MIC (ANI-MIC).

Split chamber zero resistance ammetry (SC-ZRA) was used to study microbiologically in uenced corrosion by aerobic chemoorganotrophic microeukaryotes isolated from biodiesel storage tanks. The magnitude and direction of electric current were measured between two shorted carbon steel electrodes, which were deployed in separate chambers connected by a salt bridge (via a SC-ZRA assembly). This approach permitted rapid screening for the corrosive activity of these previously understudied microeukaryotes. During this study, two previously understudied microeukaryotes (Byssochlamys sp. SW2 and Yarrowia lipolytica) showed increased biomass, an increase in electrochemical signal (current), and a corresponding increase in corrosion rate (weight loss). However, other previously understudied microeukaryote (Wickerhammomyces sp. SE3) showed an increase in biomass without an increase in electrochemical signal and minimal corrosion rate. Indicating, that the SC-ZRA technique can screen for the corrosive activity of a microorganism, regardless of overall microbial activity. This technique could be used to quickly assess the corrosive potential for a range of previously understudied microorganisms.