Centre d'études et d'expertise sur les risques, l'environnement, la mobilité et l'aménagement

No abstract

No abstract

Numerical modeling of superconductors is widely recognized as a powerful tool for interpreting experimental results, understanding physical mechanisms and predicting the performance of high-temperature superconductor (HTS) tapes, wires and devices. This is especially true for ac loss calculation, since a sufficiently low ac loss value is imperative to make these materials attractive for commercialization. In recent years, a large variety of numerical models, based on different techniques and implementations, have been proposed by researchers around the world, with the purpose of being able to estimate ac losses in HTSs quickly and accurately. This article presents a literature review of the methods for computing ac losses in HTS tapes, wires and devices. Technical superconductors have a relatively complex geometry (filaments, which might be twisted or transposed, or layers) and consist of different materials. As a result, different loss contributions exist. In this paper, we describe the ways of computing such loss contributions, which include hysteresis losses, eddy current losses, coupling losses, and losses in ferromagnetic materials. We also provide an estimation of the losses occurring in a variety of power applications.

No abstract

No abstract

Abstract-EuCARD-2 is a project supported by FP7-European Commission that includes, inter alia, a work-package (WP10) called "Future Magnets". This project is part of the long term development that CERN is launching to explore magnet technology at 16 T to 20 T dipole operating field, within the scope of a study on Future Circular Colliders. The EuCARD2 collaboration is closely liaising with similar programs for high field accelerator magnets in the USA and Japan. The main focus of EuCARD2 WP10 is the development of a 10 kA-class superconducting, high current density cable suitable for accelerator magnets, The cable will be used to wind a stand-alone magnet 500 mm long and with an aperture of 40 mm. This magnet should yield 5 T, when stand-alone, and will enable to reach a 15 to 18 T dipole field by placing it in a large bore background dipole of 12-15 T. REBCO based Roebel cables is the baseline. Various magnet configurations with HTS tapes are under investigation and also use of Bi-2212 round wire based cables is considered. The paper presents the structure of the collaboration and describes the main choices made in the first year of the program, which has a breadth of five to six years of which four are covered by the FP7 frame.

Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 work-package-10 is a collaborative push to take HTS materials into an accelerator quality demonstrator magnet. The demonstrator will produce 5 T standalone and between 17 T and 20 T, when inserted into the 100 mm aperture of Fresca-2 high field out-sert magnet. The HTS magnet will demonstrate the field strength and field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using multi strand Roebel cable that develops a stand-alone field of 5 T in a 40 mm clear aperture and discusses the challenges associated with good field quality using this type of material. A selection of magnet designs is presented as result of a first phase of development.Presented at: ASC 2014, 10-15 August, Charlotte, USA Geneva, Switzerland February 2015 Abstract -Future high-energy accelerators will need very high magnetic fields in the range of 20 T. The EuCARD-2 workpackage-10 is a collaborative push to take HTS materials into an accelerator quality demonstrator magnet. The demonstrator will produce 5 T standalone and between 17 T and 20 T, when inserted into the 100 mm aperture of Fresca-2 high field out-sert magnet.The HTS magnet will demonstrate the field strength and field quality that can be achieved. An effective quench detection and protection system will have to be developed to operate with the HTS superconducting materials. This paper presents a ReBCO magnet design using multi strand Roebel cable that develops a stand-alone field of 5 T in a 40 mm clear aperture and discusses the challenges associated with good field quality using this type of material. A selection of magnet designs is presented as result of a first phase of development. IndexTerms-Accelerator magnet, EuCARD-2, Superconducting Magnets, HTS magnet design, quench protection, YBCO Roebel cable, ReBCO.