The effect of acetic, maleic or succinic anhydride modi®-cations of wood ®ber on the mechanical properties and dimensional stability of differently bonded ®ber boards was studied. The binders for the ®ber boards used in this work were: powdered phenol formaldehyde resin of the novolak type (PF), polypropylene (PP) and a combination of the two. In the second part of the research, birch veneers modi®ed with succinic or phthalic anhydride were laminated with PP ®lms and the effect of the modi®cations on the interfacial bond between the two materials was studied. Signi®cant improvement in the mechanical properties of the PP-bonded boards was generally observed as a result of the anhydride modi®cations. Modi®cation of wood ®bers with maleic anhydride resulted in a reduction in the modulus of rupture of the PF-and PF/PPbonded boards, whereas acetylation and modi®cation with succinic anhydride did not cause any signi®cant changes in the modulus of rupture of the boards. The anhydride modi®cations improved the internal bond strength of the ®ber boards regardless of the binder type used. Dimensional stability of the ®ber boards was observed to increase signi®cantly as result of the modi®cations. Adhesion between the PP ®lms and wood veneer showed an increasing trend as function of the degree of modi®cation. In addition, SEM micrographs of the ®ber boards and PP-coated veneer revealed improved interaction between the two components due to the anhydride modi®cations. Einfluû chemischer Modifikation des Holzes auf die mechanischen und Hafteigen-schafton von Holz-und Polypropylen-Fascrplatten sowie Polypropylen/Furnier-Werkstoffe Der Ein¯uû der Modi®kation von Holzfasern mit Essig-, Malein-und Bernsteinsa Èureanhydrid auf die mechanischen Eigenschaften und die Dimensionsstabilita Èt von unterschiedlich gebundenen Faserplatten wurde untersucht. Als Bindemittel wurden verwendet: Phenol-Formaldehydharz (Pulver) vom Novolak-Typ (PF), Polypropylen (PP) sowie eine Kombiation der beiden. Weiterhin wurde Birkenfurnier mit Bernstein-und Phthalsa Èureanhydrid modi®ziert und mit PP-Filmen beschichtet. Der Ein¯uû der Modi®kation auf die Bindung zwischen den beiden Materialien wurde untersucht. Allgemein konnten signi®kante Verbesserungen der mechanischen Eigenschaften der PP-gebundenen Platten durch die Reaktion mit den Anhydriden erreicht werden. Die Modi®kation der Holzfasern mit Maleinanhydrid fu Èhrte zu einer Verringerung des MOR der PF-und PF/PP-gebundenen Platten. Dagegen blieb der MOR nach Acetylierung oder Modi®kation mit Bernsteinsa Èureanhydrid weitgehend unvera Èndert. Alle Modi®kationen mit den Anhydriden verbesserten die Querzugfestigkeit der Faserplatten unabha Èngig vom Bindemittel. Die Dimensionsstabilita Èt der Faserplatten stieg aufgrund der Modi®kation ebenfalls deutlich an. Die Haftung zwischen den PP-Schichten und dem Furnier verbesserte sich parallel zum Ausmaû der Modi®kation. Zusa Ètzlich konnte anhand von REM-Aufnahmen von Fascrplatten und PP-beschichtetem Furnier die verbesserte Wechselwirkung der beiden Kompon...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.