We investigated some properties of coronal mass ejections (CMEs), such as speed, acceleration, polar angle, angular width and mass, using data acquired by the Large Angle Spectrometric coronagraph (LASCO) onboard Solar and Heliospheric Observatory (SOHO) from 31 July 1997 to 31 March 2014, i.e. during the Solar Cycles 23 and 24. We used two CME catalogs: one provided by the Coordinated Data Analysis Workshops (CDAW) Data Center and one obtained by the Computer Aided CME Tracking software (CACTus) detection algorithm. For each dataset, we found that the number of CMEs observed during the peak of Cycle 24 was higher or comparable to the one during Cycle 23, although the photospheric activity during Cycle 24 was weaker than during Cycle 23. Using the CMEs detected by CACTus we noted that the number of events [N ] is of the same order of magnitude during the peaks of the two cycles, but the peak of the CME distribution during Cycle 24 is more extended in time (N > 1500 during 2012 and 2013). We ascribe the discrepancy between CDAW and CACTus results to the observer bias for CME definition in the CDAW catalog. We also used a dataset containing 19,811 flares of C-, M-, and X-class, observed by the Geostationary Operational Environmental Satellite (GOES) during the same period. Using both datasets, we studied the relationship between the mass ejected by the CMEs and the flux emitted during the corresponding flares: we found 11,441 flares that were temporally correlated with CMEs for CDAW and 9120 for CACTus. Moreover, we found a log-linear relationship between the flux of the flares integrated from the start to end in the 0.1 -0.8 nm range and the CME mass. We also found some differences in the mean CMEs velocity and acceleration between the events associated with flares and those that were not.

ASTRI-Horn is an Imaging Atmospheric Cherenkov Telescope characterized by a dual-mirror optical system with a primary mirror diameter of 4.3 m and a curved focal surface covered by silicon photomultiplier (SiPM) sensors managed by an innovative fast front-end electronics. ASTRI-Horn is installed in Italy at the INAF “M.C. Fracastoro” observing station (Mount Etna, Italy); it is the prototype of nine similar telescopes forming the ASTRI MiniArray that will be installed at the Teide Astronomical Observatory, in Tenerife (Canary Islands, Spain). In the ASTRI-Horn camera, the output signals from SiPMs are AC coupled to the front-end electronics stopping any slow varying signals. However, the random arrival of the night sky background photons produces fast fluctuations in the signal that the electronics is able to detect. The noise generated by this effect is proportional to the level of the diffuse night sky background. In this work, we present the analysis of the background data in ASTRI-Horn observations during the period December 2018–March 2019, using images of triggered showers. We compare the results relative to 2018 December 7-8 and 2019 March 6-7 nights with the contemporary night sky background fluxes measured by UVscope. This is a small auxiliary instrument mounted on the external structure of the ASTRI-Horn telescope and devoted to the night sky background evaluation in the UV band. A strong correlation between the considered data was detected. This correlation can be a diagnostic tool to assure the proper behavior of the ASTRI-Horn camera in view of the ASTRI MiniArray implementation. ASTRI-Horn is also equipped with the Variance technique able to sample the level of the pixel signals in absence of showers with an high rate. The method presented in this paper, based on shower images, is a new approach that has never been investigated until now. It does not substitute the Variance, that will the baseline for the background evaluation after exhaustive testings, but it is complementary to it when Variance data are available. This is the only one method working very well, that can be applied whenever the standard Variance method is not operative.

No abstract

No abstract