Managing the gas–liquid interface within gas‐diffusion electrodes (GDEs) is key to maintaining high product selectivities in carbon dioxide electroreduction. By screening silver‐catalyzed GDEs over a range of applied current densities, an inverse correlation was observed between carbon monoxide selectivity and the electrochemical double‐layer capacitance, a proxy for wetted electrode area. Plotting current‐dependent performance as a function of cumulative charge led to data collapse onto a single sigmoidal curve indicating that the passage of faradaic current accelerates flooding. It was hypothesized that high cathode alkalinity, driven by both initial electrolyte conditions and cathode half‐reactions, promotes carbonate formation and precipitation which, in turn, facilitates electrolyte permeation. This mechanism was reinforced by the observations that post‐test GDEs retain less hydrophobicity than pristine materials and that water‐rinsing and drying electrodes temporarily recovers peak selectivity. This knowledge offers an opportunity to design electrodes with greater carbonation tolerance to improve device longevity.
Redox flow batteries are an emerging technology for long-duration grid energy storage, but further cost reductions are needed to accelerate adoption. Improving electrode performance within the electrochemical stack offers a pathway to reduced system cost through decreased resistance and increased power density. To date, most research efforts have focused on modifying the surface chemistry of carbon electrodes to enhance reaction kinetics, electrochemically active surface area, and wettability. Less attention has been given to electrode microstructure, which has a significant impact on reactant distribution and pressure drop within the flow cell.Here, drawing from commonly used carbon-based diffusion media (paper, felt, cloth), we systematically investigate the influence of electrode microstructure on electrochemical performance. We employ a range of techniques to characterize the microstructure, pressure drop, and electrochemically active surface area in combination with in-operando diagnostics performed in a single electrolyte flow cell using a kinetically facile redox couple dissolved in a non-aqueous electrolyte. Of the materials tested, the cloth electrode shows the best performance; the highest current density at a set overpotential accompanied by the lowest hydraulic resistance. We hypothesize that the bimodal pore size distribution and periodic, well-defined microstructure of the cloth are key to lowering mass transport resistance.
Sluggish vanadium reaction rates on the porous carbon electrodes typically used in redox flow batteries have prompted research into pretreatment strategies, most notably thermal oxidation, to improve performance. While effective, these approaches have nuanced and complex effects on electrode characteristics hampering the development of explicit structure–function relations that enable quantitative correlation between specific properties and overall electrochemical performance. Here, we seek to resolve these relationships through rigorous analysis of thermally pretreated SGL 29AA carbon paper electrodes using a suite of electrochemical, microscopic, and spectroscopic techniques and culminating in full cell testing. We systematically vary pretreatment temperature, from 400 to 500 °C, while holding pretreatment time constant at 30 h, and evaluate changes in the physical, chemical, and electrochemical properties of the electrodes. We find that several different parameters contribute to observed performance, including hydrophilicity, microstructure, electrochemical surface area, and surface chemistry, and it is important to note that not all of these properties improve with increasing pretreatment temperature. Consequently, while the best overall performance is achieved with a 475 °C pretreatment, this enhancement is achieved from a balance, rather than a maximization, of critical properties. A deeper understanding of the role each property plays in battery performance is the first step toward developing targeted pretreatment strategies that may enable transformative performance improvements.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.