Among novel technologies for producing electricity from renewable resources, a new class of wind energy converters has been conceived under the name of Airborne Wind Energy Systems (AWESs). This new generation of systems employs flying tethered wings or aircraft in order to reach winds blowing at atmosphere layers that are inaccessible by traditional wind turbines. Research on AWESs started in the mid seventies, with a rapid acceleration in the last decade. A number of systems based on radically different concepts have been analyzed and tested. Several prototypes have been developed all over the world and the results from early experiments are becoming available. This paper provides a review of the different technologies that have been conceived to harvest the energy of high-altitude winds, specifically including prototypes developed by universities and companies. A classification of such systems is proposed on the basis of their general layout and architecture. The focus is set on the hardware architecture of systems that have been demonstrated and tested in real scenarios. Promising solutions that are likely to be implemented in the close future are also considered

No abstract

The discovery of an innovative class of thermally activated actuators based on twisted polymeric fibres has opened new horizons toward the development of effective devices that can be easily manufactured using inexpensive materials such as fishing lines or sewing threads. These new devices show large deformations when heated together with promising performance in terms of energy and power densities. With the aim of providing information and data useful for the future engineering applications, we present the results of a thermo-mechanical characterization conducted on a specific type of twisted polymeric fibre (i.e. nylon-made coiled actuators) that is considered particularly promising. A custom experimental test-bench and procedure have been developed and employed to run isothermal and isometric tensile tests on a set of specimens that are fabricated with a simple and repeatable process. The results of the experiments highlight some important issues related to the response of these actuators such as hysteresis, repeatability, predictability and stored elastic energy

The recent discovery of a new kind of thermo-active coiled polymeric wires has opened new perspectives for the implementation of a novel class of actuators that can be easily and effectively manufactured using low-cost materials such as sewing threads or fishing lines. These new devices feature large displacements in response to temperature variations and show very promising performance in terms of energy and power densities. With the aim of providing information and data useful for the future engineering applications of polymeric coiled actuators, a custom experimental test-bench and procedure have been developed and employed to characterise their thermo-mechanical response. Such a test-bench has been designed to run isothermal and isometric tensile tests on a set of sample actuators that are fabricated with a repeatable process. This paper provides technical details on the manufacturing process of such sample actuators and on the design and operation of the test-bench. Preliminary experimental results are finally reported.