No abstract

A new, quantitatively significant intermediate formed during lignin degradation by Streptomyces viridosporus T7A was isolated and characterized. In Streptomyces-inoculated cultures, the intermediate, an acid-precipitable, polyphenolic, polymeric lignin (APPL), accumulated in the growth medium. The APPL was a water-soluble polymer probably consisting of a heterogeneous mixture of molecular weight components of .20,000. APPLs were precipitable from culture filtrates after they had been acidified to pH <3 to 5. Noninoculated controls yielded little APPL, but supernatant solutions from inoculated cultures produced quantities of APPL that correlated with the biodegradability of the lignocellulose type. Maximal recovery of APPL was obtained from corn lignocellulose, reaching 30% of the initial lignin present in the substrate. APPLs contained small amounts of carbohydrate, organic nitrogen, and inorganic materials. The lignin origin of APPLs was confirmed by chemical analyses, which included acidolysis, permanganate oxidation, elemental analyses, functional group analyses, nuclear magnetic resonance spectroscopy, and 14C isotopic techniques. Analyses of APPLs from corn lignocelluloses showed that S. viridosporus-degraded APPLs were lignin derived but significantly different in structure from APPLs derived from uninoculated controls or from a standard corn milled-wood lignin. Degraded APPLs were enriched in phenolic hydroxyl groups and, to a small extent, in carboxyl groups. Degradative changes appeared to be largely oxidative and were thought to involve substantial cleavage of p-hydroxy ether linkages and methoxyl groups in the lignin.

The ability of lignin-degrading microorganisms to attack degradable plastics was investigated in pure shake flask culture studies. The degradable plastic used in this study was produced commercially by using the Archer-Daniels-Midland POLYCLEAN masterbatch and contained pro-oxidant and 6% starch. The known lignin-degrading bacteria Streptomyces viridosporus T7A, S. badius 252, and S. setonii 75Vi2 and fungus Phanerochaete chrysosporium were used. Pro-oxidant activity was accelerated by placing a sheet of plastic into a drying oven at 70°C under atmospheric pressure and air for 0, 4, 8, 12, 16, or 20 days. The effect of 2-, 4-, and 8-week longwave UV irradiation at 365 nm on plastic biodegradability was also investigated. For shake flask cultures, plastics were chemically disinfected and incubated-shaken at 125 rpm at 37°C in 0.6% yeast extract medium (pH 7.1) for Streptomyces spp. and at 30°C for the fungus in 3% malt extract medium (pH 4.5) for 4 weeks along with an uninoculated control for each treatment. Weight loss data were inconclusive because of cell mass accumulation. For almost every 70°C heat-treated film, the Streptomyces spp. demonstrated a further reduction in percent elongation and polyethylene molecular weight average when compared with the corresponding uninoculated control. Significant (P < 0.05) reductions were demonstrated for the 4and 8-day heat-treated films by all three bacteria. Heat-treated films incubated with P. chrysosporium consistently demonstrated higher percent elongation and molecular weight average than the corresponding uninoculated controls, but were lower than the corresponding zero controls (heat-treated films without 4-week incubation). The 2and 4-week UV-treated films showed the greatest biodegradation by all three bacteria. Virtually no degradation by the fungus was observed. To our knowledge, this is the first report demonstrating bacterial degradation of these oxidized polyethylenes in pure culture.

This study aimed to determine the effect of pretreating defatted soy flakes with ultrasound on soy protein isolate (SPI) yield and functionality. Defatted soy flakes dispersed into water (16%, w/w) were sonicated for 30, 60 and 120 s at ultrasonic amplitudes of 21 and 84 lm pp (peak to peak amplitude in lm), representing low and high power, respectively. The power densities were 0.30 and 2.56 W mL -1 , respectively. The SPI yield increased by 13 and 34%, after sonication for 120 s at low and high power, respectively. The sonication of defatted soy flakes for 120 s at the higher power level improved the SPI solubility by 34% at pH 7.0, while decreasing emulsification and foaming capacities by 12 and 26%, respectively, when compared to control SPI. Rheological behavior of the SPI was also modified with significant loss in consistency coefficient due to sonication. Some of these results could be explained by the loss of the protein native state with increased sonication time and power.