Large‐scale morphology, in particular meander bend depth, bar dimensions, and bifurcation dynamics, are greatly affected by the deflection of sediment transport on transverse bed slopes due to gravity and by secondary flows. Overestimating the transverse bed slope effect in morphodynamic models leads to flattening of the morphology, while underestimating leads to unrealistically steep bars and banks and a higher braiding index downstream. However, existing transverse bed slope predictors are based on a small set of experiments with a minor range of flow conditions and sediment sizes, and in practice models are calibrated on measured morphology. The objective of this research is to experimentally quantify the transverse bed slope effect for a large range of near‐bed flow conditions with varying secondary flow intensity, sediment sizes (0.17–4 mm), sediment transport mode, and bed state to test existing predictors. We conducted over 200 experiments in a rotating annular flume with counterrotating floor, which allows control of the secondary flow intensity separate from the streamwise flow velocity. Flow velocity vectors were determined with a calibrated analytical model accounting for rough bed conditions. We isolated separate effects of all important parameters on the transverse slope. Resulting equilibrium transverse slopes show a clear trend with varying sediment mobilities and secondary flow intensities that deviate from known predictors depending on Shields number, and strongly depend on bed state and sediment transport mode. Fitted functions are provided for application in morphodynamic modeling.

The morphological development of fluvial and tidal systems is forecast more and more frequently by models in scientific and engineering studies for decision making regarding climate change mitigation, flood control, navigation and engineering works. However, many existing morphodynamic models predict unrealistically high channel incision, which is often dampened by increased gravity-driven sediment transport on side-slopes by up to two orders of magnitude too high. Here we show that such arbitrary calibrations dramatically bias sediment dynamics, channel patterns, and rate of morphological change. For five different models bracketing a range of scales and environments, we found that it is impossible to calibrate a model on both sediment transport magnitude and morphology. Consequently, present calibration practice may cause an order magnitude error in either morphology or morphological change. We show how model design can be optimized for different applications. We discuss the major implications for model interpretation and a critical knowledge gap.

The full-text may be used and/or reproduced, and given to third parties in any format or medium, without prior permission or charge, for personal research or study, educational, or not-for-prot purposes provided that: • a full bibliographic reference is made to the original source • a link is made to the metadata record in DRO • the full-text is not changed in any way The full-text must not be sold in any format or medium without the formal permission of the copyright holders.

Tidal channel networks, estuaries and ebb deltas are usually formed over a period longer than observations cover. Much is known about their characteristics and formation from linear stability analyses, numerical modelling and field observations. However, experiments are rare whilst these can provide data-rich descriptions of morphological evolution in fully controlled boundary and initial conditions. Our objective is to ascertain whether tidal basins can be formed in experiments, what the possible scale effects are, and whether morphological equilibrium of such systems exists.We experimentally created tidal basins with simple channel networks and ebb deltas in a 1.2 by 1.2 m square basin with either a fixed or self-formed tidal inlet and initially flat sediment bed in the tidal basin raised above the bed of the sea. Rather than create tides by varying water level, we tilted the entire basin over the diagonal. The advantage of this novel method is that the bed surface slopes in downstream direction both during flood and ebb phases, resulting in significant transport and morphological change in the flood phase as well as the ebb phase. This overcomes the major problem of earlier experiments which were entirely ebb-dominated, and reduces the experiment time by an order of magnitude.Ebb deltas formed in sand were entirely bedload dominated whereas the lightweight plastic sediment was intermittently suspended. Channels bifurcated during channel deepening and backward erosion to form a network of up to four orders. For initially dry tidal plains, the tidal prism increased as more sediment eroded from basin to ebb delta, so that evolution accelerated initially. The rate of change, the size of the channels and the final length of channels and delta were very sensitive to the tidal amplitude, tidal period and initial water depth in the basin. Most experiments with sand terminated with all sediment below the threshold for motion, whilst lightweight sediment remained mobile in the inlet region and firstorder channels, suggesting that sustained morphodynamics are feasible in experiments. We discuss how this novel experimental setup can be extended to produce tidal deltas, estuaries and other tidal systems and study their dynamics as a function of their forcing.