a b s t r a c tAs the number of space-borne SAR sensors increases, a rising number of different SAR acquisition modes is in use, resulting in a higher variation within the image products. This variability in acquisition geometry, radiometry, and last but not least polarimetry raises the need for a consistent SAR image description incorporating all available sensors and acquisition modes. This paper therefore introduces the framework of the Kennaugh elements to comparably represent all kinds of multi-scale, multi-temporal, multi-polarized, multi-frequency, and hence, multi-sensor data in a consistent mathematical framework. Furthermore, a novel noise model is introduced that estimates the significance and thus the (polarimetric) information content of the Kennaugh elements. This facilitates an advanced filtering approach, called multi-scale multi-looking, which is shown to improve the radiometric accuracy while preserving the geometric resolution of SAR images. The proposed methodology is finally demonstrated using sample applications that include TerraSAR-X (X-band), Envisat-ASAR, RADARSAT-2 (C-band) and ALOS-PALSAR (L-band) data as well as the combination of all three frequencies. Thus the suitability of the Kennaugh element framework for practical use in proved for advanced SAR remote sensing.

In recent years, the German Remote Sensing Data Center (DFD) of the German Aerospace Center (DLR) has gained a lot of experience in water surface extraction from synthetic aperture radar (SAR) data for various application domains. In this context, four approaches have been developed, which jointly form the so-called DFD Water Suite: The Water Mask Processor (WaMaPro) is based on a simple and highperformance algorithm that processes multi-sensor SAR data in order to provide decision-makers with information about the location of water surfaces. The Rapid Mapping of Flooding tool (RaMaFlood) has been developed for flood extent mapping using an interactive object-based classification algorithm. The TerraSAR-X Flood Service (TFS) is used for rapid mapping activities and provides satellite-derived information about the extent of floods in order to support emergency management authorities and decisionmakers. It is based on a fully automated processing chain. The last approach is the TanDEM-X Water Indication Mask processor (TDX WAM). It is part of the processing chain for the generation of the seamless, accurate, and high-resolution global digital elevation model (DEM) produced based on data of the TanDEM-X mission. Its purpose is to support the subsequent DEM editing process by the generation of a global reference water mask. In this study, the design of the four approaches and their methodological backgrounds are explained in detail, while simultaneously elaborating on the preferred application domains for the different algorithms. The advantages and disadvantages of the four approaches are identified by qualitatively as well as quantitatively evaluating the water masks derived from data of the TanDEM-X mission for five test sites located in Vietnam, China, Germany, Mali, and the Netherlands.

The German SAR interferometry mission TanDEM-X performed on two TerraSAR-X satellites flying in close formation will provide a global Digital Elevation Model (DEM). A by-product is so-called the Water Indication Mask (WAM). The purpose of this supplementary information layer is to support the DEM editing process. Water surfaces usually show lower coherence in an interferometric data set due to temporal de-correlation and low backscattering. Consequently the corresponding elevation values derived from the interferogram are random and produce a virtual relief. This paper introduces the operational water body detection workflow that synergistically evaluates amplitude and coherence information. The presented results of two test sites reveal that the methodology is globally applicable, classifications are highly accurate and the algorithm is appropriate for operational image processing. The water body detection consists of two steps: the Water Body Detection (WBD) derived of one single DEM scene and the mosaicking of multiple WBD to a single Water Indication Mask (WAM). The fusion strategy for the final TanDEM-X WAM considers all WBD acquired at different times in two global coverages and bases on a fusion by union containing the results of the amplitude and the coherence.

The TanDEM-X mission will derive a global digital elevation model (DEM) with satellite SAR interferometry. Height references play an important role to ensure the required height accuracy of 10m absolute and 2m relative for 90% of the data. In this paper the main height reference data sets ICESat (for DEM calibration), SRTM (for phase unwrapping) and kinematic GPS-Tracks (KGPS -for DEM verification) are analyzed regarding to their accuracy. For the ICESat data a reliable quality measure is developed. For SRTM an improved version adjusted to reliable ICESat data is presented and a concept for collecting and evaluating decimeter-precise kinematic GPS tracks is proposed.

Wetlands in semi-arid Africa are vital as water resource for local inhabitants and for biodiversity, but they are prone to strong seasonal fluctuations. Lac Bam is the largest natural freshwater lake in Burkina Faso, its water is mixed with patches of floating or flooded vegetation, and very turbid and sediment-rich. These characteristics as well as the usual cloud cover during the rainy season can limit the suitability of optical remote sensing data for monitoring purposes. This study demonstrates the applicability of weather-independent dual-polarimetric Synthetic Aperture Radar (SAR) data for the analysis of spatio-temporal wetland dynamics. A TerraSAR-X repeat-pass time series of dual-co-polarized HH-VV StripMap data-with intervals of 11 days, covering two years (2013)(2014)(2015) from the rainy to the dry season-was processed to normalized Kennaugh elements and classified mono-temporally and multi-temporally. Land cover time series and seasonal duration maps were generated for the following four classes: open water, flooded/floating vegetation, irrigated cultivation, and land (non-wetland). The added value of dual-polarimetric SAR data is demonstrated by significantly higher multitemporal classification accuracies, where the overall accuracy (88.5%) exceeds the classification accuracy using single-polarimetric SAR intensity data (82.2%). For relevant change classes involving flooded vegetation and irrigated fields dual-polarimetric data (accuracies: 75%-97%) are favored to single-polarimetric data (42%-87%). This study contributes to a better understanding of the dynamics of semi-arid African wetlands in terms of water areas including water with flooded vegetation, and the location and timing of irrigated cultivations.