Favoring the CO2 reduction reaction (CO2RR) over the hydrogen evolution reaction and controlling the selectivity towards multicarbon products are currently major scientific challenges in sustainable energy research. It is known that the morphology of the catalyst can modulate catalytic activity and selectivity, yet this remains a relatively underexplored area in electrochemical CO2 reduction. Here, we exploit the material tunability afforded by colloidal chemistry to establish unambiguous structure/property relations between Cu nanocrystals and their behavior as electrocatalysts for CO2 reduction. Our study reveals a non-monotonic size-dependence of the selectivity in cube-shaped copper nanocrystals. Among 24 nm, 44 nm and 63 nm cubes tested, the cubes with 44 nm edge length exhibited the highest selectivity towards CO2RR (80 %) and faradaic efficiency for ethylene (41 %). Statistical analysis of the surface atom density suggests the key role played by edge sites in CO2RR.
In catalysis science stability is as crucial as activity and selectivity. Understanding the degradation pathways occurring during operation and developing mitigation strategies will eventually improve catalyst design, thus facilitating the translation of basic science to technological applications. Herein, we reveal the unique and general degradation mechanism of metallic nanocatalysts during electrochemical CO2 reduction, exemplified by different sized copper nanocubes. We follow their morphological evolution during operation and correlate it with the electrocatalytic performance. In contrast with the most common coalescence and dissolution/precipitation mechanisms, we find a potential-driven nanoclustering to be the predominant degradation pathway. Grand-potential density functional theory calculations confirm the role of the negative potential applied to reduce CO2 as the main driving force for the clustering. This study offers a novel outlook on future investigations of stability and degradation reaction mechanisms of nanocatalysts in electrochemical CO2 reduction and, more generally, in electroreduction reactions.
Despite substantial progress in the electrochemical conversion of CO 2 into value-added chemicals, the translation of fundamental studies into commercially relevant conditions requires additional efforts. Here, we study the catalytic properties of tailored Cu nanocatalysts under commercially relevant current densities in a gas-fed flow cell. We demonstrate that their facet-dependent selectivity is retained in this device configuration with the advantage of further suppressing hydrogen production and increasing the faradaic efficiencies toward the CO 2 reduction products compared to a conventional H-cell. The combined catalyst and system effects result in stateof-the art product selectivity at high current densities (in the range 100−300 mA/cm 2 ) and at relatively low applied potential (as low as −0.65 V vs RHE). Cu cubes reach an ethylene selectivity of up to 57% with a corresponding mass activity of 700 mA/mg, and Cu octahedra reach a methane selectivity of up to 51% with a corresponding mass activity of 1.45 A/mg in 1 M KOH.
Herein, the assembly of CsPbBr QD/AlO inorganic nanocomposites, by using atomic layer deposition (ALD) for the growth of the amorphous alumina matrix (AlO ), is described as a novel protection scheme for such QDs. The nucleation and growth of AlO on the QD surface was thoroughly investigated by miscellaneous techniques, which highlighted the importance of the interaction between the ALD precursors and the QD surface to uniformly coat the QDs while preserving the optoelectronic properties. These nanocomposites show exceptional stability towards exposure to air (for at least 45 days), irradiation under simulated solar spectrum conditions (for at least 8 h), and heat (up to 200 °C in air), and finally upon immersion in water. This method was extended to the assembly of CsPbBr I QD/AlO and CsPbI QD/AlO nanocomposites, which were more stable than the pristine QD films.
The ability to tune thin oxide coatings by wetchemistry is desirable for many applications, yet it remains a key synthetic challenge. In this work, we introduce a general colloidal atomic layer deposition (c-ALD) synthesis to grow an alumina shell with tunable thickness around nanocrystalline cores of various compositions spanning from ionic semiconductors (i.e., CsPbX 3 , with X = Br, I, Cl) to metal oxides and metals (i.e., CeO 2 and Ag). The distinctive characteristics of each core (i.e., emission, facile surface functionalization, stability) allowed us to optimize and to elucidate the chemistry of the c-ALD process. Compared to gas-phase ALD, this newly developed synthesis has the advantage of preserving the colloidal stability of the nanocrystalline core while controlling the shell thickness from 1 to 6 nm. As one example of the opportunities offered by the growth of a thin oxide shell, we study the anion exchange reaction in the CsPbX 3 perovskites nanocrystals by in situ X-ray diffraction, which had been impeded so far by the instability of this class of materials and by the fast exchange kinetics.
Suitable postsynthesis surface modification of lead-chalcogenide quantum dots (QDs) is crucial to enable their integration in photovoltaic devices. Here we exploit arenethiolate anions to completely replace pristine oleate ligands on PbS QDs in the solution phase, thus preserving the colloidal stability of QDs and allowing their solution-based processability into photoconductive thin films. Complete QD surface modification relies on the stronger acidic character of arenethiols compared to that of alkanethiols and is demonstrated by FTIR and UV−vis−NIR absorption spectroscopy analyses, which provide quantitative evaluation of stoichiometry and thermodynamic stability of the resulting system. Arenethiolate ligands induce a noticeable reduction of the optical band gap of PbS QDs, which is described and explained by charge transfer interactions occurring at the organic/inorganic interface that relax exciton confinement, and a large increase of QD molar absorption coefficient, achieved through the conjugated moiety of the replacing ligands. In addition, surface modification in the solution phase promotes switching of the symmetry of PbS QD self-assembled superlattices from hexagonal to cubic close packing, which is accompanied by further reduction of the optical band gap, ascribed to inter-QD exciton delocalization and dielectric effects, together with a drastic improvement of the charge transport properties in PbS QD solids. As a result, smooth dense-packed thin films of arenethiolatecapped PbS QDs can be integrated in heterojunction solar cells via a single solution-processing step. Such single PbS QD layers exhibit abated cracking upon thermal or chemical postdeposition treatment, and the corresponding devices generate remarkable photocurrent densities and overall efficiencies, thus representing an effective strategy toward low-cost processing for QD-based photovoltaics.
Herein, we report a colloidal wet-chemical approach enabling control on dopant concentration and location in a nanocrystal host lattice. Growth-doping and nucleation-doping, driven by primary and tertiary amines, respectively, were identified as predominant doping mechanisms responsible for the introduction of nitrogen impurities in interstitial and substitutional sites in highly branched rutile TiO2 nanostructures. High-resolution X-ray photoelectron spectroscopy was used to distinguish the two nitrogen occupational lattice sites and, in combination with UV–vis absorption spectroscopy, to investigate the impact of the nitrogen impurities on the optoelectronic properties. The implementation of the nitrogen-doped titania nanostructures in photoelectrodes for water oxidation suggests that these atomically defined building blocks can function as a platform to investigate the impact of the nitrogen occupational sites on the photocatalytic properties. By deliberately choosing precursors and reaction conditions, instead of relying on the most common high temperature annealing of preformed metal oxide in ammonia, we emphasize the importance of understanding the chemistry behind doping to achieve an unprecedented level of control on effective dopant introduction and, therefore, property tunability.
Forster resonant energy transfer (FRET)-mediated exciton diffusion through artificial nanoscale building block assemblies could be used as an optoelectronic design element to transport energy. However, so far, nanocrystal (NC) systems supported only diffusion lengths of 30 nm, which are too small to be useful in devices. Here, we demonstrate a FRET-mediated exciton diffusion length of 200 nm with 0.5 cm 2 /s diffusivity through an ordered, two-dimensional assembly of cesium lead bromide perovskite nanocrystals (CsPbBr 3 PNCs). Exciton diffusion was directly measured via steady-state and timeresolved photoluminescence (PL) microscopy, with physical modeling providing deeper insight into the transport process. This exceptionally efficient exciton transport is facilitated by PNCs' high PL quantum yield, large absorption cross section, and high polarizability, together with minimal energetic and geometric disorder of the assembly. This FRET-mediated exciton diffusion length matches perovskites' optical absorption depth, thus enabling the design of device architectures with improved performances and providing insight into the high conversion efficiencies of PNC-based optoelectronic devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.