Annotation. Introduction. The article examines the services of logistic outsourcing from the point of view of Ukrainian manufacturing companies, analyzes the results of the survey, compares them with global trends. It was determined that Ukrainian companies use logistic outsourcing less often than companies in other regions of the world. Also, the most often outsourced fields were identified. Purpose. Analysis of logistics outsourcing services from the viewpoint of Ukrainian manufacturing companies and comparison of survey results based on the survey with global trends. Results. It was found that from the list of enterprise groups classification (micro, small, medium, large) all categories use the services of freight forwarding companies. The following types of logistic processes are most often outsourced: transportation, lease and maintenance of equipment, warehousing, logistic chain optimization. It was found that among other countries in the study of third-party logistics, Ukraine occupies the lowest position in the usage of outsourcing services in logistics. The reasons for outsourcing logistic processes in logistics are significant: lack of own resources and capacity, cost reduction. The relationship between causes and logistic processes has shown that in order to reduce logistic costs in the enterprise it is necessary to outsource transportation. Conclusions. Statistical research has shown a small relationship between the areas of logistic outsourcing and the main causes of outsourcing of logistic activities. Therefore, it is not appropriate to say that some logistical measures should be outsourced and others should not. The mixed system, which combines the usage of own and third-party production facilities, is the most suitable for most Ukrainian manufacturing companies Keywords: logistics, outsourcing, third-party logistics, transport, warehousing, supply chain management, optimization, respondent, survey.
Today considerable experience in the development of tar sands is accumulated. However, well-known mining technologies do not cover the entire depth range of natural bitumen deposits. In addition, there are significant energy-intensive technol 309 ogies and negative environmental impacts. In view of this, the purpose of this work is to improve the method of extracting natural bitumen in site for a deposit interval of 75-200 m and to substantiate the basic technological scheme of this method. The proposed method of extracting bitumen from poorly cemented reservoirs in the depth range of 50 – 400 m provides: creation of artificial production; the transfer of the rock into the water mixture composition under the action of high pressure jets of a heated mixture of water, a hydrocarbon solvent and a flotation agent; separation from the rock and concentration of bitumen in the production as a result of its heating, dissolution and flotation; selection of depleted bitum slurry from the production by gas lift. The proposed method of extracting bitumen is the transfer of the rock at the its occurrence site to the suspension condition on the excavation created by the hydraulic production method, separation and concentration of bitumen by dissolving it with a heated hydrocarbon solvent and a flotation agent (hydrocarbon reagents) and extraction in composition of the depleted rock slurry to the surface by the gas lift method. As the preliminary calculations show, the proposed method will allow the efficient extraction of bitumen and highly viscous oil from weakly cemented reservoirs in the depth range of 50-400 m. Also, the proposed technology creates the preconditions for the development of oil sands at a depth of 75-200 m since there is currently no effective technology for the interval. In addition, it can significantly reduce energy costs, environmental pollution and greenhouse gas emissions.
Актуальним завданням сучасного матеріалознавства є підвищення характеристик матеріалів при зниженні енерговитрат і екологічного навантаження на навколишнє середовище при їх синтезі. Одним з матеріалів надзвичайно широкого спектру призначення є силіцій (IV) оксид. Вимоги до його експлуатаційних характеристик на сучасному рівні зводяться до отримання нанорозмірного аморфного силіцій (IV) оксиду високої чистоти. Екологізація виробництва силіцій (IV) оксиду може бути досягнута використанням в якості поновлюваної і дешевої сировини відходів рисового виробництва – рисового лушпиння. Технологія отримання силіцій (IV) оксиду з рисового лушпиння є менш енерговитратною в порівнянні з традиційною переробкою кварцу і рівень забруднюючого впливу на навколишнє середовище такої технології істотно нижче. Для отримання силіцій (IV) оксиду з рисового лушпиння з високим ступенем чистоти в даній роботі запропоновано проводити перед термообробкою рослинної сировини екстракційний витяг аморфної складової целюлози. Ця операція проводилась за температури 100 °C протягом 6 годин при перемішуванні пульпи в 15 %-му розчині сульфатної кислоти. Аналіз фазового складу силіцій (IV) оксиду, отриманого з рисового лушпиння після кислотної обробки, показав, що аморфна фаза SiO2 може бути одержана в діапазоні температур 600–650 °C На підставі результатів дослідження кінетики термодеструкції рисового лушпиння в неізотермічному режимі запропонована математична модель процесу, яка дозволяє визначати ступінь розкладання рисового лушпиння в залежності від температури його термообробки. Це необхідно для проектування обладнання з переробки рисового лушпиння в виробництві силіцій (IV) оксиду високої чистоти.
The study addresses the problem of using recycled materials for the production of a wide range of diverse products; in this context, the paper investigates the extraction of amorphous silicon (IV) dioxide from rice waste, i.e. rice husk, which differs in its chemical composition from all other cereal crops by a high content of silicon dioxide. Amorphous silicon (IV) oxide is widely used in electronics, medicine, food industry, cosmetology, paintwork materials manufacturing, and other industries. Amorphous silicon(IV) oxide has to meet various requirements, the main ones being amorphous structure, degree of purification, and particle size. A derivatographic method of analysis is used to study the non-isothermal kinetics of rice husk residue thermal decomposition. According to the results of derivatographic, chemical, and phase analyzes, a method for amorphous silicon (IV) oxide extraction by thermal decomposition of rice husk after the lignin removal has been proposed. The values of relative activation energies and the pre-exponential factors of the reactions have been calculated. A mathematical model characterized by a system consisting of three first order differential equations and four algebraic equations has been designed. Through the use of the proposed model, the time response characteristics of the process have been studied. Анотація У рамках вирішення проблеми використання вторинної сировини для виробництва широкого спектру різноманітних продуктів, розглядається виділення аморфного силіцій (IV) оксиду з відходів рисового виробництва -рисового лушпиння, яке відрізняється за своїм хімічним складом від усіх інших злакових культур великим вмістом діоксиду кремнію. Аморфний силіцій (IV) оксид має широкий спектр застосування в електроніці, медицині, харчовій промисловості, косметології, при виробництві лаків і фарб, а також в інших галузях промисловості. До аморфного діоксиду кремнію пред'являються різні вимоги, але основними є аморфна структура, ступінь очищення та розмір частинок. Для вивчення неізотермічної кінетики термічного розкладання залишку рисового лушпиння застосовували дериватографічний метод аналізу. За результатами дериватографічного, хімічного і фазового аналізів запропоновано механізм процесу виділення аморфного силіцій (IV) оксиду шляхом термічного розкладання рисового лушпиння після видалення лігніну. Розраховані значення умовних енергій активації і предекспоненціальних множників реакцій. Побудовано математичну модель, яка описується системою, що складається з трьох диференціальних рівнянь першого порядку і чотирьох алгебраїчних. З її допомогою вивчені тимчасові характеристики процесу. Ключові Аннотация В рамках решения проблемы использования вторичного сырья для производства широкого спектра разнообразных продуктов, рассматривается выделение аморфного диоксида кремния из отходов рисового производства -рисовой шелухи, которая отличается по своему химическому составу от всех других злаковых культур большим содержанием диоксида кремния. Аморфный диоксид кремния имеет широкий спектр применения в ...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.