No abstract

When designing a year-round home heating system that uses only solar radiation energy, the cooperation of an architect and an HVAC (heating, ventilation, and air conditioning) designer is necessary. These systems occupy a large area in relation to a building’s floor surface, especially when they are located in a climate like Central Europe or colder. The aim of the article was to create a balanced integration process by implementing the subsequent steps that are necessary to integrate a solar heating system within a building. In the first stage, a solar collector and a heat accumulator were selected. The innovation of the system involves the use of a solar concentrating collector as an air heater. Assessment criteria were then proposed in order to show the influence of the location of the solar heating system on the building’s architecture, functionality, and energy balance, while at the same time assuming its passive standard. System integrations concerning both an existing and new building were analyzed. The system’s basic components were selected for the three chosen solutions, taking into account the possibility of using heat losses resulting from the location of the installation.

This article describes the innovative photovoltaic powered seasonal thermal storage—PVPSTS system. It was used in the design of a plus-energy detached single-family house with a usable area of 98 m2. This area meets the requirements of the latest building regulations in Poland. The building, with the innovative HVAC installation, was subjected to energy analysis, and a numerical model was also developed. The model was tested based on TMY data for the location of Wroclaw, Poland. Analysis of the results allowed the authors to learn the specifics of the operation of the system throughout the year and to also define its efficiency. The required size of the storage stack was determined to be 1.6 × 1.6 × 0.3 m. The photovoltaic installation, which was integrated with the roof, can produce 48 GJ of electricity per year. This is five to six times more than the building’s heating needs, and any excess energy can be exported to the power grid.

The quality of the housing environment (HE) is an important issue that has a direct impact on the life of inhabitants. Aiming for quality in residential architecture begins with a well-designed HE, with the designing process being a value that is difficult to evaluate. Nowadays, a well-designed HE takes into account the energy efficiency of a building. An appropriate degree of thermal comfort, which is required by inhabitants, needs to be considered at the design stage. Designers can use building certification programs and multi-criteria analysis to motivate investors to construct buildings in accordance with energy efficiency requirements. These systems respond to the needs of energy efficiency, thermal comfort, sustainable heating, and ventilation. Defining ways and methods to evaluate quality in architectural projects will allow the value of the HE to be improved. For this purpose, a multi-criteria analysis of five systems that can be used to evaluate HE quality and energy efficiency in a temperate climate was conducted: (1) Building For Life 12, (2) Home Quality Mark, (3) Housing Quality Indicators, (4) Système D’évaluation De Logements (Sel), and (5) NF Habitat-NF Habitat HQE. This analysis concerned information about the systems, their applicability in practice, and the applied assessment measures. The article shows that the quality of the HE consists of specific factors that can be distinguished and indicated by evaluation systems. As a result of the carried out assessment of the housing environment, 13 original categories of building assessment criteria were defined. The results of the conducted analysis indicated that it is possible to: (i) identify factors for the improvement of HE quality; (ii) prepare objective systems for the measurement of the HE; and (iii) use such systems in practice, e.g., in the design industry, real estates, and public administration. Moreover, the systems can be used in legal regulations for updating urban policies.

No abstract

No abstract

No abstract

No abstract