The goal of the work was to evaluate mechanical performance of full-scale timber beams containing scarf joint with a dowel. Work focused on standard testing using modular system to obtain eff ective stiff ness and strength of the beams with and without the joint. The work further researched a contact zone between two timber parts of the joint -at the scarf face. This was carried out using non-destructive optical technique -digital image correlation (DIC) and newly developed algorithm. The joint was made of Norway spruce, dims. 6×0.2×0.24 m and was loaded by two modes: a) 3-point bending and b) 4-point bending. During the loading, a sequence of images was acquired for further investigation of contact zone using the proposed algorithm. The joint with scarf and dowel provided enough eff ective stiff ness, ie. 73-93% for 3-point bending test and 71% for 4-point bending with respect to MOE measured on reference solid beams. Eff ective strength of the joint was also relatively high and in a range of 55% and 60% with respect to reference solid beams in both 3-point and 4-point bending tests. Contact length diff ered for loading modes. Mean contact length in symmetrical 4-point bending was about 40%, for asymmetrical 3-point bending test, it was approx. 20% on face closer to support and 44% on a face closer to loads.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.