Simulation of the transient motion of pigs through liquid and gas pipelines is presented. The differential form of the mass and linear momentum equations for compressible liquid and gas flows were solved by a finite difference numerical technique. The fluid flow equations were combined with a linear momentum equation for the pig and a model for bypass flow through the pig. The pig/wall contact forces were simulated by a stick/slip model. The contact forces developed by disk pigs and the pipe wall were predicted by a postbuckling finite element analysis of the discs. Test cases representing typical pigging operations were studied using the numerical model developed. The fluid flow and pig behavior predicted by the model presented a reasonable behavior, and contributed for a better understanding of the pig dynamics through gas and liquid pipelines.
For the present work, a numerical simulation of the 100% oxy-firing combustion process inside an industrial aluminum remelting reverb furnace is presented. Three different configurations were analyzed: (i) a staged combustion process with parallel injection jets for oxygen and natural gas, (ii) a staged combustion process with a divergent jet for the oxygen, and (iii) a non-staged combustion process, with parallel jets. In all the cases, the injections were directed towards the aluminum bath, which was maintained at constant temperature. The numerical procedure was based on the finite volume formulation. The κ-ε model of turbulence was selected for simulating the turbulent flow field. The combustion process was calculated based on the finite rate models of Arrhenius and Magnussen, and the Discrete Transfer Radiation model was employed for predicting the radiation heat transfer. The numerical predictions allowed the determination of the flame patterns, species concentration distribution, temperature and velocity fields. This kind of analysis can be a powerful tool for evaluating design options such as the type, number and positioning of the burners. The present work illustrates a preliminary comparison of three types of burners. From the results obtained, the staged combustion process with a divergent jet presented the best configuration, since the flame length was not too long as to damage the refractory wall. Further it presented the largest region with low water vapor concentration close to the aluminum surface.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.