This work consists in the use of a 3A zeolite (K-LTA) obtained by a process of exchange of sodium for potassium (4A zeolite), synthesized from Venezuelan kaolin for the removal of Pb (II) ions from aqueous solutions by batch process mode in order to consider its application in treating industrial wastewaters. The 3A zeolite was characterized for X-ray powder diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR) and scanning electron microscopy and energy dispersive X-ray microanalysis (SEM-EDX). The metal concentration in the equilibrium C e (mg•L −1) after adsorption with 3A zeolite was analyzed using flame atomic absorption spectrometry (FAAS). The influences of the solution pH, contact time, metal initial concentration and adsorbent dosage have been studied. The retention of metal occurring at pH values around 6.5 and the adsorption equilibrium was obtained at 60 min. The equilibrium process was well described by Langmuir, Freundlich and Dubinin-Radushkevich (D-R) isotherm models. The Langmuir parameters q m (mg•g −1) and b (L•mg −1) (which are related to the sorption capacity and constant of sorption energy) obtained were 14.64 and 5.42 respectively. The Pb (II) experimental uptake was about 14.56 mg•g −1 , a little smaller than the theoretical one given by Langmuir isotherm model. The regression parameters and correlation coefficients (R) indicate that the adsorption data for Pb (II) removal fit better the Langmuir isotherm model. Moreover, 0 < 1/n < 1 (1/n is 0.13), indicating that adsorption of metal ions on the zeolite, is a favorable physical process. The application of removing of the metal lead from real samples was examined by industrial wastewater samples. For all samples, the percentage of recovery was found with accuracy of more than 98%. The present work suggests 3A zeolite used as a sorbent material with relatively low cost, obtained from Venezuelan raw material; it is a candidate for removal lead ion and probably other cationic heavy metal species from wastewater.
Ceria nanoparticles were synthesized employing chitosan as template and thermal treatment at different temperatures (350, 650, and 960°C). The effect of calcination temperature on structural properties and photocatalytic activity of ceria nanopowder was also tested. Degradation of an azo dye, Congo Red (CR) as a model aqueous pollutant, was investigated by means of photocatalysis of ceria nanoparticles under visible light irradiation. The influence of catalyst amount, initial CR concentrations, and degradation reaction kinetics were studied. The results were compared with commercial CeO2at the same degradation conditions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.