The growing human population and a changing environment have raised significant concern for global food security, with the current improvement rate of several important crops inadequate to meet future demand . This slow improvement rate is attributed partly to the long generation times of crop plants. Here, we present a method called 'speed breeding', which greatly shortens generation time and accelerates breeding and research programmes. Speed breeding can be used to achieve up to 6 generations per year for spring wheat (Triticum aestivum), durum wheat (T. durum), barley (Hordeum vulgare), chickpea (Cicer arietinum) and pea (Pisum sativum), and 4 generations for canola (Brassica napus), instead of 2-3 under normal glasshouse conditions. We demonstrate that speed breeding in fully enclosed, controlled-environment growth chambers can accelerate plant development for research purposes, including phenotyping of adult plant traits, mutant studies and transformation. The use of supplemental lighting in a glasshouse environment allows rapid generation cycling through single seed descent (SSD) and potential for adaptation to larger-scale crop improvement programs. Cost saving through light-emitting diode (LED) supplemental lighting is also outlined. We envisage great potential for integrating speed breeding with other modern crop breeding technologies, including high-throughput genotyping, genome editing and genomic selection, accelerating the rate of crop improvement.

The introduction of the Reduced height (Rht)-B1b and Rht-D1b semidwarfing genes led to impressive increases in wheat (Triticum aestivum) yields during the Green Revolution. The reduction in stem elongation in varieties containing these alleles is caused by a limited response to the phytohormone gibberellin (GA), resulting in improved resistance to stem lodging and yield benefits through an increase in grain number. Rht-B1 and Rht-D1 encode DELLA proteins, which act to repress GA-responsive growth, and their mutant alleles Rht-B1b and Rht-D1b are thought to confer dwarfism by producing more active forms of these growth repressors. While no semidwarfing alleles of Rht-A1 have been identified, we show that this gene is expressed at comparable levels to the other homeologs and represents a potential target for producing novel dwarfing alleles. In this study, we have characterized additional dwarfing mutations in Rht-B1 and Rht-D1. We show that the severe dwarfism conferred by Rht-B1c is caused by an intragenic insertion, which results in an in-frame 90-bp insertion in the transcript and a predicted 30-amino acid insertion within the highly conserved amino-terminal DELLA domain. In contrast, the extreme dwarfism of Rht-D1c is due to overexpression of the semidwarfing Rht-D1b allele, caused by an increase in gene copy number. We show also that the semidwarfing alleles Rht-B1d and Rht-B1e introduce premature stop codons within the amino-terminal coding region. Yeast two-hybrid assays indicate that these newly characterized mutations in Rht-B1 and Rht-D1 confer "GA-insensitive" dwarfism by producing DELLA proteins that do not bind the GA receptor GA INSENSITIVE DWARF1, potentially compromising their targeted degradation.

Xylem tracheary elements (TEs) form hollow, sap-conducting tubes kept open by thickened ribs of secondary cell wall that provide the major structural element in wood. These ribs are enriched with cellulose and lignin, molecules that utilize more atmospheric CO(2) than any other biopolymer on Earth. The thickenings form characteristic patterns (e.g., spiral and pitted) that depend upon the bundling of underlying microtubules [1, 2]. To identify microtubule-associated proteins (MAPs) involved in patterning microtubules, we optimized an in vitro system for triggering single Arabidopsis cells to differentiate synchronously into TEs. From more than 200 microtubule-implicated proteins, AtMAP70-5 was the only MAP upregulated upon, and specific to, TE differentiation. It lines the borders of each microtubule bundle and forms C-shaped "spacers" between adjacent bundles. Manipulating levels of AtMAP70-5 and its binding partner AtMAP70-1 by overexpression or RNA interference (RNAi) silencing shifted the balance between the characteristic patterns. RNAi silencing produced stunted plants with disorganized vascular bundles. In culture, RNAi knockdown caused ribs of secondary cell wall, surrounded by microtubules, to invaginate and fall into the cytoplasm. These results suggest that AtMAP70-5 and AtMAP70-1 are essential for defining where secondary cell wall polymers are applied at the cell cortex in wood-forming cells.

The synthesis, structures, and reactivity of cationic aluminum complexes containing the N,N'-diisopropylaminotroponiminate ligand ((i)Pr(2)-ATI(-)) are described. The reaction of ((i)Pr(2)-ATI)AlR(2) (1a-e,g,h; R = H (a), Me (b), Et (c), Pr (d), (i)Bu (e), Cy (g), CH(2)Ph (h)) with [Ph(3)C][B(C(6)F(5))(4)] yields ((i)()Pr(2)-ATI)AlR(+) species whose fate depends on the properties of the R ligand. 1a and 1b react with 0.5 equiv of [Ph(3)C][B(C(6)F(5))(4)] to produce dinuclear monocationic complexes [([(i)Pr(2)-ATI] AlR)(2)(mu-R)][(C(6)F(5))(4)] (2a,b). The cation of 2b contains two ((i)()Pr(2)-ATI)AlMe(+) units linked by an almost linear Al-Me-Al bridge; 2a is presumed to have an analogous structure. 2b does not react further with [Ph(3)C][B(C(6)F(5))(4)]. However, 1a reacts with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to afford ((i Pr(2)-ATI)Al(C(6)F(5))(mu-H)(2)B(C(6)F(5))(2) (3) and other products, presumably via C(6)F(5)(-) transfer and ligand redistribution of a [((i)()Pr(2)-ATI)AlH][(C(6)F(5))(4)] intermediate. 1c-e react with 1 equiv of [Ph(3)C][B(C(6)F(5))(4)] to yield stable base-free [((i)Pr(2)-ATI)AlR][B(C(6)F(5))(4)] complexes (4c-e). 4c crystallizes from chlorobenzene as 4c(ClPh).0.5PhCl, which has been characterized by X-ray crystallography. In the solid state the PhCl ligand of 4c(ClPh) is coordinated by a dative PhCl-Al bond and an ATI/Ph pi-stacking interaction. 1g,h react with [Ph(3)C][B(C(6)F(5))(4)] to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5g,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][(BC(6)F(5))(4)] intermediates. 1c,h react with B(C(6)F(5))(3) to yield ((i)Pr(2)-ATI)Al(R)(C(6)F(5)) (5c,h) via C(6)F(5)(-) transfer of [((i)Pr(2)-ATI)AlR][RB(C(6)F(5))(3)] intermediates. The reaction of 4c-e with MeCN or acetone yields [((i)Pr(2)-ATI)Al(R)(L)][B(C(6)F(5))(4)] adducts (L = MeCN (8c-e), acetone (9c-e)), which undergo associative intermolecular L exchange. 9c-e undergo slow beta-H transfer to afford the dinuclear dicationic alkoxide complex [(((i)Pr(2)-ATI)Al(mu-O(i)()Pr))(2)][B(C(6)F(5))(4)](2) (10) and the corresponding olefin. 4c-e catalyze the head-to-tail dimerization of tert-butyl acetylene by an insertion/sigma-bond metathesis mechanism involving [((i)Pr(2)-ATI)Al(C=C(t)Bu)][B(C(6)F(5))(4)] (13) and [((i)Pr(2)-ATI)Al(CH=C((t)()Bu)C=C(t)Bu)][B(C(6)F(5))(4)] (14) intermediates. 13 crystallizes as the dinuclear dicationic complex [([(i Pr(2)-ATI]Al(mu-C=C(t)Bu))(2)][B(C(6)F(5))(4)](2).5PhCl from chlorobenzene. 4e catalyzes the polymerization of propylene oxide and 2a catalyzes the polymerization of methyl methacrylate. 4c,e react with ethylene-d(4) by beta-H transfer to yield [((i)Pr(2)-ATI)AlCD(2)CD(2)H][B(C(6)F(5))(4)] initially. Polyethylene is also produced in these reactions by an unidentified active species.

SummaryMost plant microtubule-associated proteins (MAPs) have homologues across the phylogenetic spectrum. To find potential plant-specific MAPs that will have evaded bioinformatic searches we devised a low stringency method for isolating proteins from an Arabidopsis cell suspension on endogenous taxol-microtubules. By tryptic peptide mass fingerprinting we identified 55 proteins that were enriched on taxol-microtubules. Amongst a range of known MAPs, such as kinesins, MAP65 isoforms and MOR1, we detected 'unknown' 70 kDa proteins that belong to a family of five closely related Arabidopsis proteins having no known homologues amongst non-plant organisms. To verify that AtMAP70-1 associates with microtubules in vivo, it was expressed as a GFP fusion. This confirmed that the protein decorates all four microtubule arrays in both transiently infected Arabidopsis and stably transformed tobacco BY-2 suspension cells. Microtubule-directed drugs perturbed the localization of AtMAP70-1 but cytochalasin D did not. AtMAP70-1 contains four predicted coiledcoil domains and truncation studies identified a central domain that targets the fusion protein to microtubules in vivo. This study therefore introduces a novel family of plant-specific proteins that interact with microtubules.

Reaction of TaCl 5 with 2 equiv of an amine in the presence of sodium silicate and pyridine affords Ta(NR)Cl 3 (py) 2 in good yield. Reaction of NbCl 5 with ZnCl 2 followed by addition of an amine RNH 2 and pyridine affords M(NR)Cl 3 (dme) (dme is 1,2-dimethoxyethane). For niobium this reaction proceeds smoothly regardless of the amine but is ineffective with tantalum and alkyl amines. An alternative route involves reaction of TaCl 5 with 3 equiv of RNH 2 to form [RNH 3 ] 2 [Ta(NR)Cl 5 ], followed by reaction of this salt with ZnCl 2 in the presence of dme. The molecular structure of Nb(N t Bu)Cl 3 (dme) (formula C 8 H 19 Cl 3 NNbO 2 ) was determined by X-ray crystallography (monoclinic space group Cc with a ) 30.565(4) Å, b ) 7.2406(13) Å, c ) 13.915(2) Å, β ) 90.626(7)°, V ) 3079.4(8) Å 3 , Z ) 8). The Nb-N bond length is 1.72 Å with a Nb-N-C bond angle of 177°in a distorted octahedral structure. In order to characterize the M-N stretching frequencies in these compounds, IR data for each compound are compared with calculated stretching frequencies using the commercially available Spartan calculation package. These experiments reveal that there is no real M-N stretching frequency in these imidos. Rather, the M-N modes are strongly coupled to N-C and C-H or C-C modes in these imidos. IR active modes are observed at ∼1260 cm -1 for tantalum alkyl imidos and ∼1350 cm -1 for tantalum aryl imidos. These correspond to a Ta-(N-C) stretch coupled to the CR 3 umbrella deformation.

SummaryAtMAP70-5, a divergent member of the MAP70 family of microtubule-associated proteins, is required for anisotropic cell growth in Arabidopsis

The introduction of Reduced height (Rht)-B1b and Rht-D1b into bread wheat (Triticum aestivum) varieties was a key component of the 'green revolution' and today these alleles are the primary sources of semi-dwarfism in wheat. The Rht-1 loci encode DELLA proteins, which are transcription factors that affect plant growth and stress tolerance. In bread wheat, Rht-D1b and Rht-B1b influence resistance to the disease Fusarium Head Blight. To identify Rht-1 variants, locus specific primers were developed and used to sequence the entire open reading frame (ORF) and 1.7 kb of the 5' and 0.5 kb of the 3' flanking regions of Rht-A1 (Rht-A1+f), Rht-B1 (Rht-B1+f), and Rht-D1 (Rht-D1+f) in bread wheat (36 sequences from each genome) and tetraploid and diploid wheat (TDW) (one to three sequences from each genome). Among the bread wheat accessions, the Rht-A1+f and Rht-D1+f sequences contained relatively low genetic diversity and few haplotypes relative to the Rht-B1+f sequences. The TDW accessions were relatively rich in genetic diversity and contained the majority of the polymorphic sites. Novel polymorphisms, relative to 'Chinese Spring', discovered among the accessions include 160 and 197 bp insertions 5' of Rht-B1 and a frameshift in the Rht-B1 ORF. Quantitative real-time PCR using shoot and leaf tissue from 5-day-old seedlings of genotypes lacking or containing the 5' insertions revealed no major effect on Rht-B1 transcript accumulation. This research provides insights into the genetic diversity present at the Rht-1 loci in modern bread wheat and in relation to ancestral wheat accessions.