This report presents the conceptual design of a new European research infrastructure EuPRAXIA. The concept has been established over the last four years in a unique collaboration of 41 laboratories within a Horizon 2020 design study funded by the European Union. EuPRAXIA is the first European project that develops a dedicated particle accelerator research infrastructure based on novel plasma acceleration concepts and laser technology. It focuses on the development of electron accelerators and underlying technologies, their user communities, and the exploitation of existing accelerator infrastructures in Europe. EuPRAXIA has involved, amongst others, the international laser community and industry to build links and bridges with accelerator science — through realising synergies, identifying disruptive ideas, innovating, and fostering knowledge exchange. The Eu-PRAXIA project aims at the construction of an innovative electron accelerator using laser- and electron-beam-driven plasma wakefield acceleration that offers a significant reduction in size and possible savings in cost over current state-of-the-art radiofrequency-based accelerators. The foreseen electron energy range of one to five gigaelectronvolts (GeV) and its performance goals will enable versatile applications in various domains, e.g. as a compact free-electron laser (FEL), compact sources for medical imaging and positron generation, table-top test beams for particle detectors, as well as deeply penetrating X-ray and gamma-ray sources for material testing. EuPRAXIA is designed to be the required stepping stone to possible future plasma-based facilities, such as linear colliders at the high-energy physics (HEP) energy frontier. Consistent with a high-confidence approach, the project includes measures to retire risk by establishing scaled technology demonstrators. This report includes preliminary models for project implementation, cost and schedule that would allow operation of the full Eu-PRAXIA facility within 8—10 years.

No abstract

No abstract

Amplification of broadband frequency-modulated (FM) pulses in high-efficiency materials such as ytterbium-doped strontium fluorapatite results in significant gain narrowing, leading to reduced on-target bandwidths for beam smoothing and to conversion from frequency modulation to amplitude modulation (AM). To compensate for these effects, we have applied precision spectral sculpting, requiring both amplitude and phase shaping, to the amplification of broadband FM pulses in narrow-band gain media. We have demonstrated sculpting for centerline small-signal gains of 10(4), producing amplified pulses that have both sufficient bandwidths for on-target beam smoothing and temporal profiles that have no potentially damaging AM.

Ytterbium-doped Sr(5)(PO(4))(3)F was successfully lased at 985 nm in quasi-cw mode with a slope efficiency of 74% and an absorbed threshold energy of 18 mJ. Q-switched slope efficiencies of 21% were obtained with a maximum energy of 9.4 mJ in 8.8-ns pulses.

No abstract

Scaling the particle beam luminosity from laser wakefield accelerators to meet the needs of the physics community requires a significant, thousand-fold increase in the average power of the driving lasers. Multipulse extraction is a promising technique capable of scaling high peak power lasers by that thousand-fold increase in average power. However, several of the best candidate materials for use in multipulse extraction amplifiers lase at wavelengths far from the 0.8–1.0 μm region which currently dominates laser wakefield research. In particular, we have identified Tm:YLF, which lases near 1.9 µm, as the most promising candidate for high average power multipulse extraction amplifiers. Current schemes to scale the laser, plasma, and electron beam parameters to alternative wavelengths are unnecessarily restrictive in that they stress laser performance gains to keep plasma conditions constant. In this paper, we present a new and more general scheme for wavelength scaling a laser wakefield acceleration (LWFA) design point that provides greater flexibility in trading laser, plasma, and electron beam parameters within a particular design point. Finally, a multipulse extraction 1.9 µm Tm:YLF laser design meeting the EuPRAXIA project’s laser goals is discussed.

No abstract