A scalable method to produce exfoliated and functionalized boron nitride sheets is described. The procedure involves the high temperature treatment of commercially obtained hexagonal boron nitride followed by hydrolysis. A mechanism of formation is proposed and analysis by XRD, FTIR, FESEM, TEM, AFM, XPS, TGA, and Raman spectroscopy reveals exfoliated boron nitride sheets functionalized by hydroxyl groups that can be further reacted with isocyanate.

Graphite's insolubility in conventional solvents is a major obstacle to its utilization. This challenge is typically addressed by chemical modification such as oxidation, followed by reduction. However, pristine graphene possesses superior properties as oxidation and reduction lead to degradation of the graphene. Here we demonstrate the use of an interfacial trapping technique to assemble laterally macroscopic films of pristine graphene that are up to 95% transparent. This is accomplished by modest sonication of natural flake graphite in a water/heptane mixture to form continuous films at the interface between two immiscible liquids. Furthermore, the graphene sheets readily climb hydrophilic solid substrates, forming a homogeneous thin film one to four layers thick. These films are composed of a network of overlapping graphene sheets and shown to have long-range structure with conductivities on the order of 400 S/cm.

Mechanical stress can drive chemical reactions and is unique in that the reaction product can depend on both the magnitude and the direction of the applied force. Indeed, this directionality can drive chemical reactions impossible through conventional means. However, unlike heat-or pressure-driven reactions, mechanical stress is rarely applied isometrically, obscuring how mechanical inputs relate to the force applied to the bond. Here we report an atomic force microscope technique that can measure mechanically induced bond scission on graphene in real time with sensitivity to atomic-scale interactions. Quantitative measurements of the stress-driven reaction dynamics show that the reaction rate depends both on the bond being broken and on the tip material. Oxygen cleaves from graphene more readily than fluorine, which in turn cleaves more readily than hydrogen. The technique may be extended to study the mechanochemistry of any arbitrary combination of tip material, chemical group and substrate.

Applications requiring pristine graphene derived from graphite demand a solution stabilization method that utilizes an easily removable media. Using a combination of molecular dynamics simulations and experimental techniques, we investigate the solublization/suspension of pristine graphene sheets by an equimolar mixture of benzene and hexafluorobenzene (C(6)H(6)/C(6)F(6)) that is known to form an ordered structure solidifying at 23.7 °C. Our simulations show that the graphene surface templates the self-assembly of the mixture into periodic layers extending up to 30 Å from both sides of the graphene sheet. The solvent structuring is driven by quadrupolar interactions and consists of stacks of alternating C(6)H(6)/C(6)F(6) molecules rising from the surface of the graphene. These stacks result in density oscillations with a period of about 3.4 Å. The high affinity of the 1:1 C(6)H(6)/C(6)F(6) mixture with graphene is consistent with observed hysteresis in Wilhelmy plate measurements using highly ordered pyrolytic graphite (HOPG). AFM, SEM, and TEM techniques verify the state of the suspended material after sonication. As an example of the utility of this mixture, graphene suspensions are freeze-dried at room temperature to produce a sponge-like morphology that reflects the structure of the graphene sheets in solution.