Widespread access to greener energy is required in order to mitigate the effects of climate change. A significant barrier to cleaner natural gas usage lies in the safety/efficiency limitations of storage technology. Despite highly porous metal-organic frameworks (MOFs) demonstrating record-breaking gas-storage capacities, their conventionally powdered morphology renders them non-viable. Traditional powder shaping utilising high pressure or chemical binders collapses porosity or creates low-density structures with reduced volumetric adsorption capacity. Here, we report the engineering of one of the most stable MOFs, Zr-UiO-66, without applying pressure or binders. The process yields centimetre-sized monoliths, displaying high microporosity and bulk density. We report the inclusion of variable, narrow mesopore volumes to the monoliths’ macrostructure and use this to optimise the pore-size distribution for gas uptake. The optimised mixed meso/microporous monoliths demonstrate Type II adsorption isotherms to achieve benchmark volumetric working capacities for methane and carbon dioxide. This represents a critical advance in the design of air-stable, conformed MOFs for commercial gas storage.

The environmental benefits of cleaner, gaseous fuels such as natural gas and hydrogen are widely reported. Yet, practical usage of these fuels is inhibited by current gas storage technology. Here, we discuss the wide-ranging potential of gas-fuels to revolutionize the energy sector and introduce the limitations of current storage technology that prevent this transition from taking place. The practical capabilities of adsorptive gas storage using porous, crystalline metal-organic frameworks (MOFs) are examined with regard to recent benchmark results and ultimate storage targets in this field. In particular, the industrial limitations of typically powdered MOFs are discussed while recent breakthroughs in MOF processing are highlighted. We offer our perspective on the future of practical, rather than purely academic, MOF developments in the increasingly critical field of environmental fuel storage.

We have developed a direct regio- and chemoselective method for generating functionalized aromatic cuprate compounds through deprotonative directed ortho cupration using TMP(tetramethylpiperidino)-cuprates (R(TMP)Cu(CN)Li2; R = alkyl, phenyl, or TMP) that are prepared by mixing of CuCN, RLi, and lithium tetramethylpiperidide (LTMP) in THF. Deprotonative cupration of various functionalized benzenes with TMP-cuprate proved effective for the direct generation of o-functionalized copper aromatic and heteroaromatic derivatives, particularly those with electrophilic functional groups, such as cyano, amide, and halogens. Direct cupration, followed by electrophilic trapping, provided a convenient preparative method for 1,2- or 1,2,3-multisubstituted aromatic compounds. The functionalized aromatic cuprate intermediates were also found to undergo oxidation reactions very efficiently and with high regio- and chemoselectivity to afford functionalized phenol, ligand(hetero)-coupling, or homocoupling products by appropriately changing the oxidants and cuprates.

An aluminum ate base, i-Bu(3)Al(TMP)Li, has been designed and developed for regio- and chemoselective direct generation of functionalized aromatic aluminum compounds. Direct alumination followed by electrophilic trapping with I(2), Cu/Pd-catalyzed C-C bond formation, or direct oxidation with molecular O(2) proved to be a powerful tool for the preparation of 1,2- or 1,2,3-multisubstituted aromatic compounds. This deprotonative alumination using i-Bu3Al(TMP)Li was found to be effective in aliphatic chemistry as well, enabling regio- and chemoselective addition of functionalized allylic ethers and carbamates to aliphatic and aromatic aldehydes. A combined multinuclear NMR spectroscopy, X-ray crystallography, and theoretical study showed that the aluminum ate base is a Li/Al bimetallic complex bridged by the nitrogen atom of TMP and the alpha-carbon of an i-Bu ligand and that the Li exclusively serves as a recognition point for electronegative functional groups or coordinative solvents. The mechanism of directed ortho alumination reaction of functionalized aromatic compounds has been studied by NMR and in situ FT-IR spectroscopy, X-ray analysis, and DFT calculation. It has been found that the reaction proceeds with facile formation of an initial adduct of the base and aromatic, followed by deprotonative formation of the functionalized aromatic aluminum compound. Deprotonation by the TMP ligand rather than the isobutyl ligand was suggested and reasoned by means of spectroscopic and theoretical study. The remarkable regioselectivity of the ortho alumination reaction was explained by a coordinative approximation effect between the functional groups and the counter Li(+) ion, enabling stable initial complex formation and creation of a less strained transition state structure.

A new method for catalyst deposition on the inner walls of capillary microreactors is proposed which allows exact control of the coating thickness, pore size of the support, metal particle size, and metal loading. The wall-coated microreactors have been tested in a selective hydrogenation reaction. Activity and selectivity reach values close to those obtained with a homogeneous Pd catalyst. The catalyst activity was stable for a period of 1000 h time-on-stream.

Single‐source precursors are used to produce nanostructured BiVO4 photoanodes for water oxidation in a straightforward and scalable drop‐casting synthetic process. Polyoxometallate precursors, which contain both Bi and V, are produced in a one‐step reaction from commercially available starting materials. Simple annealing of the molecular precursor produces nanocrystalline BiVO4 films. The precursor can be designed to incorporate a third metal (Co, Ni, Cu, or Zn), enabling the direct formation of doped BiVO4 films. In particular, the Co‐ and Zn‐doped photoanodes show promise for photoelectrochemical water oxidation, with photocurrent densities >1 mA cm−2 at 1.23 V vs reversible hydrogen electrode (RHE). Using this simple synthetic process, a 300 cm2 Co‐BiVO4 photoanode is produced, which generates a photocurrent of up to 67 mA at 1.23 V vs RHE and demonstrates the scalability of this approach.

No abstract

Sequential reaction of HTMP (= 2,2,6,6-tetramethylpiperidine) with nBuLi and Et2Zn affords unsolvated polymer chains of EtZn(micro-Et)(micro-TMP)Li 6. The scope of this reagent in directed ortho metalation (DoM) chemistry has been tested by its reaction with N,N-diisopropylnaphthamide in THF to give EtZn(micro-C10H6C(O)NiPr2-2)2Li.2THF 7. Data reveal that 6 has undergone reaction with 2 equiv of aromatic tertiary amide and imply that it exhibits dual alkyl/amido basicity. DFT calculations reveal that direct alkyl basicity is kinetically disfavored and instead point to a stepwise mechanism whereby 6 acts as an amido base, liberating HTMP during the first DoM event. Re-coordination of the amine at lithium then incurs the elimination of EtH. Reaction of the resulting alkyl(amido)(arylamido)zincate with a second equivalent of N,N-diisopropylnaphthamide eliminates HTMP and affords 7. Both DoM steps involve the exhibition of amido basicity and each reveals a low kinetic barrier to reaction. Understanding of this reaction sequence is tested by treating 6 with N,N-diisopropylbenzamide in THF. On the basis of theory and experiment, the presence of THF solvent (in place of stronger Lewis bases) combined with the use of a sterically less congested aromatic amide is expected to encourage threefold, stepwise reaction. Isolation and characterization of the resulting tripodal zincate Zn(micro-C6H4C(O)NiPr2-2)3Li.THF 8 bears this out and suggests a significant new level of control in zincate-induced DoM chemistry through the combination of experiment and DFT studies.