Riparian vegetation strips are widely used by river managers to increase streambank stability, among other purposes. However, though the effects of vegetation on bank stability are widely discussed they are rarely quantified, and generally underemphasize the importance of hydrologic processes, some of which may be detrimental. This paper presents results from an experiment in which the hydrologic and mechanical effects of four riparian tree species and two erosion-control grasses were quantified in relation to bank stability. Geotechnical and pore-water pressure data from streambank plots under three riparian covers (mature trees, clump grasses and bare/cropped turf grass) were used to drive the ARS bank stability model, and the resulting factor of safety (F s ) was broken down into its constituent parts to assess the contribution (beneficial or detrimental) of individual hydrologic and mechanical effects (soil moisture modification, root reinforcement and surcharge). Tree roots were found to increase soil strength by 2-8 kPa depending on species, while grass roots contributed 6-18 kPa. Slope stability analysis based on data collected during bank failures in spring 2000 (following a very dry antecedent period) shows that the mechanical effects of the tree cover increased F s by 32 per cent, while the hydrologic effects increased F s by 71 per cent. For grasses the figures were 70 per cent for mechanical effects and a reduction of F s by 10 per cent for the hydrologic effects. However, analysis based on bank failures in spring 2001 (following a wetter than average antecedent period) showed the mechanical effects of the tree cover to increase F s by 46 per cent, while hydrologic effects added 29 per cent. For grasses the figures were 49 per cent and 15 per cent respectively. During several periods in spring 2001 the hydrologic effects of the tree cover reduced bank stability, though this was always offset by the stabilizing mechanical effects. The results demonstrate the importance of hydrologic processes in controlling streambank stability, and highlight the need to select riparian vegetation based on hydrologic as well as mechanical and ecological criteria. Published in
Step-pools sequences are increasingly used to restore stream channels. This increase corresponds to significant advances in theory for step-pools in recent years. The need for step-pools in stream restoration arises as urban development encroaches into steep terrain in response to population pressures, as stream channels in lower-gradient areas require stabilization due to hydrological alterations associated with land-use changes, and as step-pools are recognized for their potential to enhance stream habitats. Despite an increasingly voluminous literature and great demand for restoration using step-pool sequences, however, the link between theory and practice is limited. In this article, we present four unique cases of stream restoration using step-pools, including the evolution of the approaches, the project designs, and adjustments in the system following restoration. Baxter Creek in El Cerrito, California demonstrates an early application of artificial step-pools in which natural adjustments occurred toward geomorphic stability and ecological improvement. Restoration of East Alamo Creek in a large residential development near San Ramon, California illustrates an example of step-pools increasingly used in locations where such a channel form would not naturally occur. Construction of a step-pool channel in Karnowsky Creek within the Siuslaw National Forest, Oregon overcame constraints posed by access and the type and availability of materials; the placement of logs allowed natural scouring below steps. Dry Canyon Creek on the property of the Mountains Restoration Trust in Calabasas, California afforded a somewhat experimental approach to designing step-pools, allowing observation and learning in the future. These cases demonstrate how theories and relationships developed for step-pool sequences over the past two decades have been applied in real-world settings. The lessons from these examples enable us to develop considerations useful for deriving an appropriate course of design, approval, and construction of artificial step-pool systems. They also raise additional fundamental questions concerning appropriate strategies for restoration of step-pool streams. Outstanding challenges are highlighted as opportunities for continuing theoretical work.
Abstract:Gully head and wall retreat has commonly been attributed to fluvial scour and head collapse as a result of soil saturation, sapping or piping. The empirical evidence to substantiate these conceptual models is sparse, however, and often contradictory. This paper explores the hydrological and mechanical controls on gully head and wall stability by modelling the hydrology, stability and elastic deformation of a marl gully complex in Granada Province, southeast Spain. The hydrological and slope-stability simulations show that saturated conditions can be reached only where preferential fissure flow channels water from tension cracks into the base of the gully head, and that vertical or subvertical heads will be stable unless saturation is achieved. Owing to the high unsaturated strengths of marl measured in this research, failure in unsaturated conditions is possible only where the gully head wall is significantly undercut. Head retreat thus requires the formation of either a tension crack or an undercut hollow. Finite-element stress analysis of eroding slopes reveals a build up of shear stress at the gully head base, and a second stress anomaly just upslope of the head wall. Although tension cracks on gully heads have often been attributed to slope unloading, this research provides strong evidence that the so called 'sapping hollow' commonly found in the gully headwall base is also a function of stress release. Although further research is needed, it seems possible that 'pop out' failures in river channels may be caused by the same process. The hydrological analysis shows that, once a tension crack has developed, throughflow velocity in the gully headwall will increase by an order of magnitude, promoting piping and enlargement of this weakened area. It is, therefore, possible to envisage a cycle of gully expansion in which erosion, channel incision or human action unloads the slope below a gully head, leading to stress patterns that account for the tension crack and a stress-release hollow. The tension crack promotes faster throughflow, encouraging hollow enlargement and piping, which undercut the gully head. The tension crack permits the development of positive porewater pressures behind the gully head, leading either to failure or contributing to toppling. Finally the debris may be eroded by fluvial action, unloading a new section of slope and completing the cycle of gully head retreat. Copyright
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.