Hybrid coatings consisting of a heat resistant Y2O3-Al2O3-SiO2 (YAS) glass containing 2.3 wt % of graphene nanoplatelets (GNPs) were developed by flame spraying homogeneous ceramic powders-GNP granules. Around 40% of the GNPs survived the high spraying temperatures and were distributed along the splat-interfaces, forming a percolated network. These YAS-GNP coatings are potentially interesting in thermal protection systems and electromagnetic interference shields for aerospace applications; therefore silicon carbide (SiC) materials at the forefront of those applications were employed as substrates. Whereas the YAS coatings are nonconductive, the YAS-GNP coatings showed in-plane electrical conductivity (∼10(2) S·m(-1)) for which a low percolation limit (below 3.6 vol %) is inferred. Indentation tests revealed the formation of a highly damaged indentation zone showing multiple shear displacements between adjacent splats probably favored by the graphene sheets location. The indentation radial cracks typically found in brittle glass coatings are not detected in the hybrid coatings that are also more compliant.

No abstract

Multiwall carbon nanotubes (MWCNTs) oxidized by an acid treatment were deposited on the surface of as-received commercial aramid fibers containing a surface coating ("sizing"), and fibers modified by either a chlorosulfonic treatment or a mixture of nitric and sulfuric acids. The surface of the aramid fiber activated by the chemical treatments presents increasing density of CO, COOH and OH functional groups. However, these chemical treatments reduced the tensile mechanical properties of the fibers, especially when the nitric and sulfuric acid mixture was used. Characterization of the MWCNTs deposited on the fiber surface was conducted by scanning electron microscopy, Raman spectroscopy mapping and X-ray photoelectron spectroscopy. These characterizations showed higher areal concentration and more homogeneous distribution of MWCNTs over the aramid fibers for as-received fibers and for those modified with chlorosulfonic acid, suggesting the existence of interaction between the oxidized MWCNTs and the fiber coating. The electrical resistance of the MWCNT-modified aramid yarns comprising 1000 individual fibers was in the order of M Omega/cm, which renders multifunctional properties.CONACYT-CIAM (Mexico) 188089 CONICYT (Chile) 120003 "Fondo Mixto CONACYT-Gobierno del Estado de Yucatan" 24704

The thermal conductivity () of AlN (2.9 wt. % of Y 2 O 3 ) is studied as a function of the addition of multilayer graphene (from 0 to 10 vol. %). The  values of these composites, fabricated by spark plasma sintering (SPS), are independently analyzed for the two characteristic directions defined by the GNPs orientation within the ceramic matrix; that is to say, perpendicular and parallel to the SPS pressing axis. Conversely to other ceramic/graphene systems, AlN composites experience a reduction of  with the graphene addition for both orientations; actually the decrease of  for the in-plane graphene orientation results rather unusual. This behavior is conveniently reproduced when an interface thermal resistance is introduced in effective media thermal conductivity models. Also remarkable is the change in the electrical properties of AlN becoming an electrical conductor (200 S m -1 ) for graphene contents above 5 vol. %.

No abstract