Aditivo fluidificante con copolímero para mejorar la resistencia a la comprensión del hormigón resumenEl objetivo de esta investigación es hacer un análisis documental de investigaciones realizadas con el uso de aditivos fluidizantes, a base de copolímeros, con la finalidad de encontrar hormigones que cumplan con las exigencias del mercado. La metodología consistió en hacer un análisis documental/bibliográfica de investigaciones utilizando buscadores disponibles. Se utilizó como filtro de búsqueda el período del 2017 hasta marzo 2021, obteniendo como resultado, investigaciones que obtuvieron un Slump Flow de 32.5 cm., para una dosis de 0.3% de aditivo, encontrándose en un rango de 0.25% a 0.40%. El aditivo sintetizado en forma de peine, con codificación PCE-2, tuvo una resistencia a la compresión de 85 MPa con adiciones minerales, ensayado a los 28 días con una relación a/c de 0.30. Para un PC-3, se obtuvo una resistencia a la compresión de 73 MPa, sin adiciones minerales, ensayado a los 28 días a una relación a/c = 0.30. El valor promedio de resistencia a la compresión, sin adiciones minerales, fue de 61 MPa, con una relación a/c entre 0.25 a 0.30. Se concluyó que el uso de aditivos plastificante, basados en copolímeros, tiene una influencia positiva en las propiedades del hormigón, reduciendo el agua, mejorando las resistencias altas iniciales y finales, así como la permeabilidad.
Palabras clave:Aditivo superplastificante; copolímero de injerto; ensayo de asentamiento; resistencia; cadenas laterales absTracT To contribute to the solution, we set the objective of making a documentary analysis of research carried out with the use of fluidizing additives, based on copolymers, in order to find concretes that meet market demands. The methodology consisted of making a documentary / bibliographic analysis of research using Flow additive with copolymer to improve compressive strength of concrete
Se diseña y se hace referencia de forma escalonada mediante ensayos de laboratorio la presencia de fisuras y grietas en losas apoyadas. Se incorpora vidrio molido para controlar la contracción plástica con distintas dosificaciones de vidrio molido de coloración verde y marrón, adoptando 4 tipos de mezcla (1% y 5% en relación al volumen del agregado fino), ensayadas a compresión, flexión y fisuración, para una resistencia fʼc=210 Kg/cm2. El método empleado fue el deductivo con orientación aplicada y enfoque cuantitativo. El instrumento de recolección de datos fue retrolectivo, descriptivo, correlacional y explicativo. El diseño fue el experimental, longitudinal, prospectivo y el estudio de cohorte (causa-efecto). Los resultados obtenidos muestran que en los ensayos de potencial de fisuración en losas, cuando se le incorpora 1% de vidrio molido (verde o marrón), disminuyen un 83,32% y 85.18% respectivamente; así mismo, con 5% de vidrio molido (verde o marrón) disminuye un 85.82% y 88.88% respectivamente. Para esta investigación, se concluye que el vidrio molido aporta significativamente a la reducción de fisuras y grietas en una losa de hormigón y, por consiguiente, controla la contracción plástica.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.