a b s t r a c tMost organic matter can be used for bioenergy generation via anaerobic fermentation. Today, crop plants like maize play the dominant role as substrates for renewable biogas production. In this work we investigated the suitability of six dominant microalgae species (freshwater and saltwater algae and cyanobacteria) as alternative substrates for biogas production. We could demonstrate that the biogas potential is strongly dependent on the species and on the pretreatment. Fermentation of the green alga Chlamydomonas reinhardtii was efficient with a production of 587 ml (±8.8 SE) biogas g volatile solids −1 (VS −1 ), whereas fermentation of Scenedesmus obliquus was inefficient with only 287 ml (±10.1 SE) biogas g VS −1 being produced. Drying as a pretreatment decreased the amount of biogas production to ca. 80%. The methane content of biogas from microalgae was 7-13% higher compared to biogas from maize silage. To evaluate integrative biorefinery concepts, hydrogen production in C. reinhardtii prior to anaerobic fermentation of the algae biomass was measured and resulted in an increase of biogas generation to 123% (±3.7 SE). We conclude that selected algae species can be good substrates for biogas production and that anaerobic fermentation can seriously be considered as final step in future microalgae-based biorefinery concepts.

The dramatic spread of antibiotic resistance is a crisis in the treatment of infectious diseases that affect humans. Several studies suggest that wastewater treatment plants (WWTP) are reservoirs for diverse mobile antibiotic resistance elements. This review summarizes findings derived from genomic analysis of IncP-1 resistance plasmids isolated from WWTP bacteria. Plasmids that belong to the IncP-1 group are self-transmissible, and transfer to and replicate in a wide range of hosts. Their backbone functions are described with respect to their impact on vegetative replication, stable maintenance and inheritance, mobility and plasmid control. Accessory genetic modules, mainly representing mobile genetic elements, are integrated in-between functional plasmid backbone modules. These elements carry determinants conferring resistance to nearly all clinically relevant antimicrobial drug classes, to heavy metals, and quaternary ammonium compounds used as disinfectants. All plasmids analysed here contain integrons that potentially facilitate integration, exchange and dissemination of resistance gene cassettes. Comparative genomics of accessory modules located on plasmids from WWTP and corresponding modules previously identified in other bacterial genomes revealed that animal, human and plant pathogens and other bacteria isolated from different habitats share a common pool of resistance determinants.

To detect plasmid-borne antibiotic-resistance genes in wastewater treatment plant (WWTP) bacteria, 192 resistance-gene-specific PCR primer pairs were designed and synthesized. Subsequent PCR analyses on total plasmid DNA preparations obtained from bacteria of activated sludge or the WWTP's final effluents led to the identification of, respectively, 140 and 123 different resistance-gene-specific amplicons. The genes detected included aminoglycoside, blactam, chloramphenicol, fluoroquinolone, macrolide, rifampicin, tetracycline, trimethoprim and sulfonamide resistance genes as well as multidrug efflux and small multidrug resistance genes. Some of these genes were only recently described from clinical isolates, demonstrating genetic exchange between clinical and WWTP bacteria. Sequencing of selected resistance-genespecific amplicons confirmed their identity or revealed that the amplicon nucleotide sequence is very similar to a gene closely related to the reference gene used for primer design. These results demonstrate that WWTP bacteria are a reservoir for various resistance genes. Moreover, detection of about 64 % of the 192 reference resistance genes in bacteria obtained from the WWTP's final effluents indicates that these resistance determinants might be further disseminated in habitats downstream of the sewage plant.

No abstract

Biogas production from renewable resources is attracting increased attention as an alternative energy source due to the limited availability of traditional fossil fuels. Many countries are promoting the use of alternative energy sources for sustainable energy production. In this study, a metagenome from a production-scale biogas fermenter was analysed employing Roche's GS FLX Titanium technology and compared to a previous dataset obtained from the same community DNA sample that was sequenced on the GS FLX platform. Taxonomic profiling based on 16S rRNA-specific sequences and an Environmental Gene Tag (EGT) analysis employing CARMA demonstrated that both approaches benefit from the longer read lengths obtained on the Titanium platform. Results confirmed Clostridia as the most prevalent taxonomic class, whereas species of the order Methanomicrobiales are dominant among methanogenic Archaea. However, the analyses also identified additional taxa that were missed by the previous study, including members of the genera Streptococcus, Acetivibrio, Garciella, Tissierella, and Gelria, which might also play a role in the fermentation process leading to the formation of methane. Taking advantage of the CARMA feature to correlate taxonomic information of sequences with their assigned functions, it appeared that Firmicutes, followed by Bacteroidetes and Proteobacteria, dominate within the functional context of polysaccharide degradation whereas Methanomicrobiales represent the most abundant taxonomic group responsible for methane production. Clostridia is the most important class involved in the reductive CoA pathway (Wood-Ljungdahl pathway) that is characteristic for acetogenesis. Based on binning of 16S rRNA-specific sequences allocated to the dominant genus Methanoculleus, it could be shown that this genus is represented by several different species. Phylogenetic analysis of these sequences placed them in close proximity to the hydrogenotrophic methanogen Methanoculleus bourgensis. While rarefaction analyses still indicate incomplete coverage, examination of the GS FLX Titanium dataset resulted in the identification of additional genera and functional elements, providing a far more complete coverage of the community involved in anaerobic fermentative pathways leading to methane formation.

The role of a municipal wastewater treatment plant as a reservoir for bacteria carrying antibiotic resistance plasmids was analysed. Altogether, ninety-seven different multiresistance plasmids were isolated and screened by PCR for the presence of class 1 integron-specific sequences. Twelve of these plasmids were identified to carry integrons. In addition, integron-specific sequences were found on plasmid-DNA preparations from bacteria residing in activated sludge and in the final effluents of the wastewater treatment plant. Sequencing and annotation of the integrons identified nineteen different gene cassette arrays, containing twenty-one different resistance gene cassettes. These cassettes carry genes encoding eight different aminoglycoside-modifying enzymes, seven dihydrofolate reductases, three beta-lactamases, two chloramphenicol resistance proteins and two small exporter proteins. Moreover, new gene cassettes and cassettes with unknown function were identified. Eleven gene cassette combinations are described for the first time. Six integron-associated gene cassette arrays are located on self-transmissible, putative broad-host-range plasmids belonging to the IncP group. Hybridisation analyses, using the integron-specific gene cassette arrays as templates and labelled plasmid-DNA preparations from bacteria of the final effluents as hybridisation probes, revealed that bacteria containing integron-specific sequences on plasmids are released into the environment.

BackgroundDecomposition of biomass for biogas production can be practiced under wet and dry fermentation conditions. In contrast to the dry fermentation technology, wet fermentation is characterized by a high liquid content and a relatively low total solid content. In this study, the composition and functional potential of a biogas-producing microbial community in an agricultural biogas reactor operating under wet fermentation conditions was analyzed by a metagenomic approach applying 454-pyrosequencing. The obtained metagenomic dataset and corresponding 16S rRNA gene amplicon sequences were compared to the previously sequenced comparable metagenome from a dry fermentation process, meeting explicitly identical boundary conditions regarding sample and community DNA preparation, sequencing technology, processing of sequence reads and data analyses by bioinformatics tools.ResultsHigh-throughput metagenome sequencing of community DNA from the wet fermentation process applying the pyrosequencing approach resulted in 1,532,780 reads, with an average read length of 397 bp, accounting for approximately 594 million bases of sequence information in total. Taxonomic comparison of the communities from wet and dry fermentation revealed similar microbial profiles with Bacteria being the predominant superkingdom, while the superkingdom Archaea was less abundant. In both biogas plants, the bacterial phyla Firmicutes, Bacteroidetes, Spirochaetes and Proteobacteria were identified with descending frequencies. Within the archaeal superkingdom, the phylum Euryarchaeota was most abundant with the dominant class Methanomicrobia. Functional profiles of the communities revealed that environmental gene tags representing methanogenesis enzymes were present in both biogas plants in comparable frequencies. 16S rRNA gene amplicon high-throughput sequencing disclosed differences in the sub-communities comprising methanogenic Archaea between both processes. Fragment recruitments of metagenomic reads to the reference genome of the archaeon Methanoculleus bourgensis MS2T revealed that dominant methanogens within the dry fermentation process were highly related to the reference.ConclusionsAlthough process parameters, substrates and technology differ between the wet and dry biogas fermentations analyzed in this study, community profiles are very similar at least at higher taxonomic ranks, illustrating that core community taxa perform key functions in biomass decomposition and methane synthesis. Regarding methanogenesis, Archaea highly related to the type strain M. bourgensis MS2T dominate the dry fermentation process, suggesting the adaptation of members belonging to this species to specific fermentation process parameters.Electronic supplementary materialThe online version of this article (doi:10.1186/s13068-014-0193-8) contains supplementary material, which is available to authorized users.

The complete 64 508 bp nucleotide sequence of the IncP-1b antibiotic-resistance plasmid pB10, which was isolated from a waste-water treatment plant in Germany and mediates resistance against the antimicrobial agents amoxicillin, streptomycin, sulfonamides and tetracycline and against mercury ions, was determined and analysed. A typical class 1 integron with completely conserved 59 and 39 segments is inserted between the tra and trb regions. The two mobile gene cassettes of this integron encode a b-lactamase of the oxacillin-hydrolysing type (Oxa-2) and a gene product of unknown function (OrfE-like), respectively. The pB10-specific gene load present between the replication module (trfA1) and the origin of vegetative replication (oriV ) is composed of four class II (Tn3 family) transposable elements: (i) a Tn501-like mercury-resistance (mer) transposon downstream of the trfA1 gene, (ii) a truncated derivative of the widespread streptomycin-resistance transposon Tn5393c, (iii) the insertion sequence element IS1071 and (iv) a Tn1721-like transposon that contains the tetracycline-resistance genes tetA and tetR. A very similar Tn501-like mer transposon is present in the same target site of the IncP-1b degradative plasmid pJP4 and the IncP-1b resistance plasmid R906, suggesting that pB10, R906 and pJP4 are derivatives of a common ancestor. Interestingly, large parts of the predicted pB10 restriction map, except for the tetracycline-resistance determinant, are identical to that of R906. It thus appears that plasmid pB10 acquired as many as five resistance genes via three transposons and one integron, which it may rapidly spread among bacterial populations given its high promiscuity. Comparison of the pB10 backbone DNA sequences with those of other sequenced IncP-1b plasmids reveals a mosaic structure. While the conjugative transfer modules (trb and tra regions) and the replication module are very closely related to the corresponding segments of the IncP-1b resistance plasmid R751 and even more similar to the IncP-1b degradative plasmids pTSA and pADP-1, the stable inheritance operons klcAB-korC and kleAEF are most similar to those of the IncP-1b resistance plasmid pB4, and clearly less similar to the other IncP-1b plasmids. This suggests that IncP-1b plasmids can undergo recombination in the environment, which may enhance plasmid diversity and bacterial adaptability.