We present a novel, versatile, and simple solution-based routine to produce soft, nanosized Janus particles with tunable structural and physical properties at high volume yield. This process is based on the cross-linking of compartments within precisely defined multicompartment micelles (MCMs), which are themselves formed by the self-assembly of ABC triblock terpolymers. Therein, the C blocks form the stabilizing corona emanating from B compartments, which in turn reside on an A core. Cross-linking of the B compartments allows to permanently fixate the phase-separated state and dissolution in a good solvent for all blocks breaks up the MCMs into single Janus particles. They now consist of a core of cross-linked B blocks and two phase-separated hemispheres of A and C. The process gives access to unprecedented structural features such as tunable core diameter and control over the Janus balance ranging from dominant A side to equal hemispheres to dominant C side. We demonstrate that this simple one-pot approach can be extended to a range of triblock terpolymers with different block lengths and block chemistries to furnish a library of tailor-made Janus particles with widely tunable physical properties. Such a diversity and simplicity has remained unreachable with our previously developed approach using the controlled cross-linking of bulk morphologies. We show that this new synthetic route can be upscaled to a high volume yield of 10 wt %, thereby enabling large-scale applications. We further demonstrate the effect of the Janus balance on colloidal self-assembly. Janus particles with a dominant hydrophobic and a small hydrophilic patch aggregate into large clusters in water, but merely di- or trimerize in chloroform.

We describe the preparation of well-defined multicompartment micelles from polybutadiene-block-poly(1-methyl-2-vinyl pyridinium methyl sulfate)-block-poly(methacrylic acid) (BVqMAA) triblock terpolymers and their use as advanced drug delivery systems for photodynamic therapy (PDT). A porphyrazine derivative was incorporated into the hydrophobic core during self-assembly and served as a model drug and fluorescent probe at the same time. The initial micellar corona is formed by negatively charged PMAA and could be gradually changed to poly(ethylene glycol) (PEG) in a controlled fashion through interpolyelectrolyte complex formation of PMAA with positively charged poly(ethylene glycol)-block-poly(L-lysine) (PLL-b-PEG) diblock copolymers. At high degrees of PEGylation, a compartmentalized micellar corona was observed, with a stable bottlebrush-on-sphere morphology as demonstrated by cryo-TEM measurements. By in vitro cellular experiments, we confirmed that the porphyrazine-loaded micelles were PDT-active against A549 cells. The corona composition strongly influenced their in vitro PDT activity, which decreased with increasing PEGylation, correlating with the cellular uptake of the micelles. Also, a PEGylation-dependent influence on the in vivo blood circulation and tumor accumulation was found. Fully PEGylated micelles were detected for up to 24 h in the bloodstream and accumulated in solid subcutaneous A549 tumors, while non- or only partially PEGylated micelles were rapidly cleared and did not accumulate in tumor tissue. Efficient tumor growth suppression was shown for fully PEGylated micelles up to 20 days, demonstrating PDT efficacy in vivo.

Directed self-assembly processes of polymeric systems represent a powerful approach for the generation of structural hierarchy in analogy to biological systems. Herein, we utilize triiodide as a strongly polarizable counterion to induce hierarchical self-assembly of an ABC miktoarm star terpolymer comprising a polybutadiene (PB), a poly(tert-butyl methacrylate) (PtBMA), and a poly(N-methyl-2-vinylpyridinium) (P2VPq) segment. Hereby, the miktoarm architecture in conjunction with an increasing ratio of triiodide versus iodide counterions allows for a stepwise assembly of spherical micelles as initial building blocks into cylindrical structures and superstructures thereof. Finally, micrometer-sized multicompartment particles with a periodic lamellar fine structure are observed, for which we introduce the term "woodlouse". The counterion-mediated decrease in hydrophilicity of the corona-forming P2VPq block is the underlying trigger to induce this hierarchical structure formation. All individual steps and the corresponding intermediates toward these well-defined superstructures were intensively studied by scattering and electron microscopic techniques, including transmission electron microtomography.

No abstract

Dialkylphosphonate-functionalized and phosphonic acid-functionalized macromolecular chain transfer agents (macro-CTAs) are utilized for the reversible addition−fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate (BzMA) at 20% w/w solids in methanol at 64 °C. Spherical, worm-like, and vesicular nano-objects could each be generated through systematic variation of the mean degree of polymerization of the coreforming PBzMA block when using relatively short macro-CTAs. Construction of detailed phase diagrams is essential for the reproducible targeting of pure copolymer morphologies, which were characterized using transmission electron microscopy (TEM) and dynamic light scattering (DLS). For nano-objects prepared using the phosphonic acid-based macro-CTA, transfer from methanol to water leads to the development of anionic surface charge as a result of ionization of the stabilizer chains, but this does not adversely affect the copolymer morphology. Given the well-known strong affinity of phosphonic acid for calcium ions, selected nano-objects were evaluated for their in situ occlusion within growing CaCO 3 crystals. Scanning electron microscopy (SEM) studies provide compelling evidence for the occlusion of both worm-like and vesicular phosphonic acid-based nano-objects and hence the production of a series of interesting new organic−inorganic nanocomposites.

The demand for ever more complex nanostructures in materials and soft matter nanoscience also requires sophisticated characterization tools for reliable visualization and interpretation of internal morphological features. Here, we address both aspects and present synthetic concepts for the compartmentalization of nanoparticle peripheries as well as their in situ tomographic characterization. We first form negatively charged spherical multicompartment micelles from ampholytic triblock terpolymers in aqueous media, followed by interpolyelectrolyte complex (IPEC) formation of the anionic corona with bis-hydrophilic cationic/neutral diblock copolymers. At a 1:1 stoichiometric ratio of anionic and cationic charges, the so-formed IPECs are charge neutral and thus phase separate from solution (water). The high chain density of the ionic grafts provides steric stabilization through the neutral PEO corona of the grafted diblock copolymer and suppresses collapse of the IPEC; instead, the dense grafting results in defined nanodomains oriented perpendicular to the micellar core. We analyze the 3D arrangements of the complex and purely organic compartments, in situ, by means of cryogenic transmission electron microscopy (cryo-TEM) and tomography (cryo-ET). We study the effect of block lengths of the cationic and nonionic block on IPEC morphology, and while 2D cryo-TEM projections suggest similar morphologies, cryo-ET and computational 3D reconstruction reveal otherwise hidden structural features, e.g., planar IPEC brushes emanating from the micellar core.

We report on the synthesis and characterization of water-soluble stimuli-responsive organosilica hybrid nanowires that can be used as carriers for metallic nanoparticles. The nanowires were prepared from core-shell-structured cylindrical polymer brushes that served as templates with uniform size and shape. The core of the nanowires consists of a silsesquioxane network synthesized through a precursor route. The shell consists of a dense layer of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA). The hybrid nanowires exhibit pH-responsive behavior, because of the weak polyelectrolyte nature of the PDMAEMA shell. Simultaneously, the shell of PDMAEMA acts as a nanoreactor for the synthesis and immobilization of metal nanoparticles. It was further quaternized with methyl iodide, leading to a poly{[2-(methacryloyloxy)ethyl] trimethylammonium iodide} (PMETAI) cationic polyelectrolyte shell around the silsesquioxane core. The as-synthesized cationic organosilica hybrid nanowires are sensitive to salt concentration, in terms of their hydrodynamic radius. They can be functionalized with platinum nanoparticles as well, leading to stable composites of the nanowires and the platinum nanoparticles. The nanocomposites show high catalytic activity, as kinetically analyzed in the reduction of 4-nitrophenol by sodium borohydride.

In fiber-reinforced composites, the interphase nanostructure (i.e., the extended region between two phases in contact) has a pronounced influence on their interfacial adhesion. This work aims at establishing a link between the interphase design of PS-based polymeric fiber coatings and their influence on the micromechanical performance of epoxy-based composite materials. Thiol-ene photochemistry was utilized to introduce a polymeric gradient on silica-like surfaces following a two-step approach without additional photoinitiator. Two complementary grafting-techniques were adapted to modify glass fibers: "Grafting-onto" deposition of PB-b-PS diblock copolymers for thin-film coatings (thickness<20 nm) at low grafting density (<0.1 chains/nm2)--and "grafting-from" polymerization for brush-like PS homopolymer coatings of higher thickness (up to 225 nm) and higher density. Polymer-coated glass fibers were characterized for polymer content using thermogravimetric analysis (TGA) and their nanostructural morphologies by scanning electron microscopy (SEM). Model substrates of flat glass and silicon were studied by atomic force microscopy (AFM) and spectroscopic ellipsometry (SE). The change in interfacial shear strength (IFSS) due to fiber modification was determined by a single fiber pull-out experiment. Thick coatings (>40 nm) resulted in a 50% decrease in IFSS. Higher shear strength occurred for thinner coatings of homopolymer and for lower grafting densities of copolymer. Increased IFSS (10%) was found upon dilution of the surface chain density by mixing copolymers. We show that the interfacial shear strength can be increased by tailoring of the interphase design, even for systems with inherently poor adhesion. Perspectives of polymeric fiber coatings for tailored matrix-fiber compatibility and interfacial adhesion are discussed.