Dispersion engineering is essential to the performance of most modern optical systems including fiber-optic devices. Even though the chromatic dispersion of a meter-scale single-mode fiber used for endoscopic applications is negligible, optical lenses located on the fiber end face for optical focusing and imaging suffer from strong chromatic aberration. Here we present the design and nanoprinting of a 3D achromatic diffractive metalens on the end face of a single-mode fiber, capable of performing achromatic and polarization-insensitive focusing across the entire near-infrared telecommunication wavelength band ranging from 1.25 to 1.65 µm. This represents the whole single-mode domain of commercially used fibers. The unlocked height degree of freedom in a 3D nanopillar meta-atom largely increases the upper bound of the time-bandwidth product of an achromatic metalens up to 21.34, leading to a wide group delay modulation range spanning from −8 to 14 fs. Furthermore, we demonstrate the use of our compact and flexible achromatic metafiber for fiber-optic confocal imaging, capable of creating in-focus sharp images under broadband light illumination. These results may unleash the full potential of fiber meta-optics for widespread applications including hyperspectral endoscopic imaging, femtosecond laser-assisted treatment, deep tissue imaging, wavelength-multiplexing fiber-optic communications, fiber sensing, and fiber lasers.
Plasmon resonances play a pivotal role in enhancing light-matter interactions in nanophotonics, but their low-quality factors have hindered applications demanding high spectral selectivity. Here, we demonstrate the design and 3D laser nanoprinting of plasmonic nanofin metasurfaces, which support symmetry-protected bound states in the continuum up to the fourth order. By breaking the nanofins’ out-of-plane symmetry in parameter space, we achieve high-quality factor (up to 180) modes under normal incidence. The out-of-plane symmetry breaking can be fine-tuned by the nanofins’ triangle angle, opening a pathway to precisely control the ratio of radiative to intrinsic losses. This enables access to the under-, critical, and over-coupled regimes, which we exploit for pixelated molecular sensing. We observe a strong dependence of the sensing performance on the coupling regime, demonstrating the importance of judicious tailoring of light-matter interactions. Our demonstration provides a metasurface platform for enhanced light-matter interaction with a wide range of applications.
Hyperbolic metamaterials with a unique hyperbolic dispersion relation allow propagating waves with infinitely large wavevectors and a high density of states. Researchers from Korea and Singapore provide a comprehensive review of hyperbolic metamaterials, including artificially structured hyperbolic media and natural hyperbolic materials. They explain key nanophotonic concepts and describe a range of applications for these versatile materials.
Breaking the in-plane geometric symmetry of dielectric metasurfaces allows us to access a set of electromagnetic states termed symmetry-protected quasi-bound states in the continuum (qBICs). Here we demonstrate that qBICs can also be accessed by a symmetry breaking in the permittivity of the comprising materials. While the physical size of atoms imposes a limit on the lowest achievable geometrical asymmetry, weak permittivity modulations due to carrier doping, and electro-optical Pockels and Kerr effects, usually considered insignificant, open the possibility of infinitesimal permittivity asymmetries for on-demand, dynamically tunable resonances of extremely high quality factors. As a proof-of-principle, we probe the excitation of permittivity-asymmetric qBICs (ε-qBICs) using a prototype Si/TiO2 metasurface, in which the asymmetry in the unit cell is provided by the permittivity contrast of the materials. ε-qBICs are also numerically demonstrated in 1D gratings, where quality-factor enhancement and tailored interference phenomena of qBICs are shown via the interplay of geometrical and permittivity asymmetries.
Topological insulators (TIs) have unique highly conducting symmetry-protected surface states while the bulk is insulating, making them attractive for various applications in condensed matter physics. Recently, topological insulator materials have been tentatively applied for both near- and far-field wavefront manipulation of electromagnetic waves, yielding superior plasmonic properties in the ultraviolet (UV)-to-visible wavelength range. However, previous reports have only demonstrated inefficient wavefront control based on binary metasurfaces that were digitalized on a TI thin film or non-directional surface plasmon polariton (SPP) excitation. Here, we numerically demonstrated the plasmonic capabilities of the TI Bi2Te3 as a material for gap–surface plasmon (GSP) metasurfaces. By employing the principle of the geometric phase, a far-field beam-steering metasurface was designed for the visible spectrum, yielding a cross-polarization efficiency of 34% at 500 nm while suppressing the co-polarization to 0.08%. Furthermore, a birefringent GSP metasurface design was studied and found to be capable of directionally exciting SPPs depending on the incident polarization. Our work forms the basis for accurately controlling the far- and near-field responses of TI-based GSP metasurfaces in the visible spectral range.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.