Three-dimensional ͑3D͒ tungsten oxide nanowire networks have been demonstrated as a high-surface area material for building ultrasensitive and highly selective gas sensors. Utilizing the 3D hierarchical structure of the networks, high sensitivity has been obtained towards NO 2 , revealing the capability of the material to detect concentration as low as 50 ppb ͑parts per billion͒. The distinctive selectivity at different working temperatures is observed for various gases. The results highlight that the nanobelts ͑nanowires͒ technology can be adopted for the development of gas sensors with performances suitable for practical applications.

No abstract

We report an entirely new class of printed electrical gas sensors that are produced at near "zero cost". This technology exploits the intrinsic hygroscopic properties of cellulose fibers within paper; although it feels and looks dry, paper contains substantial amount of moisture, adsorbed from the environment, enabling the use of wet chemical methods for sensing without manually adding water to the substrate. The sensors exhibit high sensitivity to water-soluble gases (e.g., lower limit of detection for NH 3 < 200 parts-per-billion) with a fast and reversible response. The sensors show comparable or better performance (especially at high relative humidity) than most commercial ammonia sensors at a fraction of their price (<$0.02 per sensor). We demonstrate that the sensors proposed can be integrated into food packaging to monitor freshness (to reduce food waste and plastic pollution) or implemented into near-field-communication tags to function as wireless, battery-less gas sensors that can be interrogated with smartphones.

This work reports the recent results achieved at the SENSOR Lab, Brescia (Italy) to address the selectivity of metal oxide based gas sensors. In particular, two main strategies are being developed for this purpose: (i) investigating different sensing mechanisms featuring different response spectra that may be potentially integrated in a single device; (ii) exploiting the electronic nose (EN) approach. The former has been addressed only recently and activities are mainly focused on determining the most suitable configuration and measurements to exploit the novel mechanism. Devices suitable to exploit optical (photoluminescence), magnetic (magneto-optical Kerr effect) and surface ionization in addition to the traditional chemiresistor device are here discussed together with the sensing performance measured so far. The electronic nose is a much more consolidated technology, and results are shown concerning its suitability to respond to industrial and societal needs in the fields of food quality control and detection of microbial activity in human sweat.

No abstract

No abstract

No abstract

No abstract