Microplastic (MP) water pollution is a major problem that the world is currently facing, and wastewater treatment plants (WWTPs) represent one of the main alternatives to reduce the MP release to the environment. Several studies have analysed punctual samples taken throughout the wastewater treatment line. However, there are few long-term studies on the evolution of MPs over time in WWTPs. This work analyses the performance of a WWTP sited in Southwest Europe in relation with annual occurrence and fate of MPs. Samples were monthly taken at different points of the facility (influent, secondary effluent, final effluent, and sludge) and MPs were quantified and characterised by means of stereomicroscopy and FTIR spectrophotometry. The majority of MPs found in wastewater and sludge samples were fragments and fibres. Regarding to the chemical composition, in the water samples, polyethylene (PE), polyethylene terephthalate (PET) and polypropylene (PP) stood out, whereas, in the sludge samples, the main polymers were PET, polyamide (PA) and polystyrene (PS). The MPs more easily removed during the wastewater treatment processes were those with sizes greater than 500 µm. Results showed that the MPs removal was very high during all the period analysed with removal efficiencies between 89% and 95%, so no great variations were found between months. MP concentrations in dry sludge samples ranged between 12 and 39 MPs/g, which represented around 79% of the total MPs removed during the wastewater treatment processes. It is noticeable that a trend between temperature and MPs entrapped in sewage sludge was observed, i.e., higher temperatures entailed higher percentage of retention.

Emerging contaminants (ECs) include a diverse group of compounds not commonly monitored in wastewaters, which have become a global concern due to their potential harmful effects on aquatic ecosystems and human health. In the present work, six ECs (ibuprofen, diclofenac, erythromycin, triclosan, imidacloprid and 17α-ethinylestradiol) were monitored for nine months in influents and effluents taken from four wastewater treatment plants (WWTPs). Except for the case of ibuprofen, which was in all cases in lower concentrations than those usually found in previous works, results found in this work were within the ranges normally reported. Global removal efficiencies were calculated, in each case being very variable, even when the same EC and facility were considered. In addition, the SimpleTreat model was tested by comparing simulated and real ibuprofen, diclofenac and erythromycin data. The best agreement was obtained for ibuprofen which was the EC with the highest removal efficiencies.

At household level, clothes washing has been recognised as an emitter of microplastics (MPs) into the environment and it is supposed that dishwashing is also a source of MPs, although little attention has been paid so far. In this work, the emission of MPs released from dishwashing procedures at household level has been studied. The effect of different parameters such as time, temperature and type of detergent has been analysed. In addition, the MP content of tap water has been evaluated in order to determine its contribution to the MPs in dishwasher effluent. Results showed that when the dishwasher was operated empty with a pre-wash programme (15 min and room water temperature), between 207 and 427 MPs were released per load (3 L), whereas this value increased notably with an intensive programme (164 min and water at 70 °C) (1025–1370 MPs per load, 15 L), which highlighted the effect of temperature and time on MP release. Additionally, when a polypropylene lunch box was washed, the number of MPs released increased by 14 ± 3 MPs and 166 ± 12 MPs of total. Finally, the influence of the use of detergent with the dishwasher empty and containing lunch boxes has been studied. With detergent, 35–54% more MPs were released from dishwasher accessories, whereas no additional release took place from lunch boxes. This work shows for the first time the important contribution of domestic dishwashing to MP pollution and the environmental benefits of using more environmentally friendly materials in both dishwashing machine accessories and food utensils.