The brittle behavior of ceramics limits the use of these materials under conditions of cyclic loading, as is the case of fixed partial dentures. To improve toughness and biocompatibility of ceramics is necessary to employ powders with better purities, adjust the conditions of compaction and sintering, microstructure control and explore mechanisms for increasing the toughness. Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) is generally used for dental ceramic restorations. The zirconia framework is fabricated using the CAD/CAM system. The ceramic mechanical properties are determined by testing polished sample. Previous work did not analyze the influence of surface defects induced during dentures grinding. Ceramic restorations manufacturing are made with coarse grinding high-speed diamond rotatory cutting instruments. This process induces residual stresses and the high temperature induces surface cracks. Consequently, a lower strength and reliability of the material is observed. In this work the mechanical properties of yttria stabilized zirconia were determined with the use of samples of dental prostheses molded in patients and machined with the use of a dental laboratory CAD/CAM system. The results showed that the mechanical properties of pre-sintered blocks are different from prosthetics machined by CAD/CAM and sintered under the same conditions used in the laboratories of the prosthesis. The defects created during machining reduce the mechanical properties of zirconia.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.