Recent studies have highlighted the effects of various stimuli on the chemical reduction of graphene oxide (GO) through green reductant L-ascorbic acid (L-AA); however, the combination of near ultraviolet (NUV) light to increase the reduction rate has yet to be thoroughly explored. In this study, drop-casted GO films were subjected to chemical reduction through L-AA with various levels of exposure under 405 nm NUV radiation. The structure and uniformity of GO stackings that form the film were characterized through scanning electron microscopy (SEM) and wide-angle x-ray scattering (WAXS). Additionally, WAXS was used to track the removal of oxygencontaining functional groups along with Fourier-transform infrared (FT-IR) spectroscopy and x-ray photoelectron spectroscopy (XPS) as a function of L-AA and NUV light exposure times. XPS results demonstrated that the interaction between L-AA and NUV exposure has a significant effect on the reduction of films. Furthermore, the results that yielded the highest reduction (C-C bond concentration of 60.7%) were the longest L-AA and NUV light exposure times (48 hours and 3 hours, respectively). This report provides a study on the effects of NUV on the green reduction of GO films through L-AA with potential application in solar energy and chemical sensing applications.
Hollow polymer microspheres with superior elastic properties, high thermal stability, and energy absorbance capabilities are essential in many applications where shock and vibration need to be mitigated, such as in civil, medical, and defense industries. In this paper, the synthesis, fabrication, and characterization of hollow thermoset microspheres for syntactic polymer foam were studied. The hollow polymer microspheres (HPMs) were made by developing core–shell composites and thermally removing the polystyrene core to yield a polysiloxane shell. The HPMs were embedded into a polydimethylsiloxane (PDMS) matrix to form a polymer syntactic foam. The mechanical energy absorption characteristic of polymer syntactic foams was measured by cyclic uniaxial compression testing following ASTM 575. The engineered compression response was demonstrated by fabricating and testing syntactic foams with different porosities, ranging from a 50 vol% to 70 vol% of HPMs. Through scanning electron microscopy (SEM), we observed that the HPM contributes to the energy absorption of the syntactic foam. Moreover, Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) determined the necessity of a profound study to understand the effects of varying HPM synthesis parameters, as well as the syntactic foam fabrication methods. It was shown that the compressive modulus and toughness can be increased by 20% using a 70 vol% of porosity with synthesized HPM syntactic foams over bulk PDMS. We also found that the energy absorbed increased by 540% when using a 50 vol% of porosity with fabricated HPM-PDMS syntactic foams.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.