Systematic optimization of the tooth contact pattern under load is an open problem in the design of spiral bevel and hypoid gears. In order to enhance its shape and position, gear engineers have been assisted by numerical tools based on trial-and-error approaches, and/or they have been relying on the expertise of skilled operators. The present paper proposes a fully automatic procedure to optimize the loaded tooth contact pattern, with the advantage of eventually reducing design time and cost. The main problem was split into two identification subproblems: first, to identify the ease-off topography capable of optimizing the contact pattern; second, to identify the machine-tool setting variations required to obtain such ease-off modifications. Both of them were formulated and solved as unconstrained nonlinear optimization problems. In addition, an original strategy to quickly approximate the tooth contact pattern under load was conceived. The results obtained were very satisfactory in terms of accuracy, robustness, and computational speed. They also suggest that the time required to optimize the contact pattern can be significantly reduced compared with typical time frames. A sound mathematical framework ensures results independent of the practitioner’s subjective decision-making process. By defining a proper objective function, the proposed method can also be applied to affect other contact properties, such as to improve the motion graph or to decrease the sensitivity of the transmission to assembly errors. Furthermore, it can be easily adapted to any gear drive by virtue of its systematic and versatile nature.
This paper presents an automatic procedure to optimize the loaded tooth contact pattern of face-milled hypoid gears with misalignments varying within prescribed ranges. A two-step approach is proposed to solve the problem: in the first step, the pinion tooth micro-topography is automatically modified to bring the perturbed contact patterns (as the assembly errors are varied within the tolerance limits) match a target area of the tooth, while keeping them off the edges; in the second step, a subset of the machine-tool settings is identified to obtain the required topography modifications. Both steps are formulated and solved as unconstrained nonlinear optimization problems. While the general methodology is similar to the one recently proposed by the same authors for the optimization at nominal conditions, here the robustness issues with respect to misalignment variations are considered and directly included in the optimization procedure: no a posteriori check for robustness is therefore required. Numerical tests show that nominally satisfactory and globally robust hypoid pairs can be designed by a direct process and within a unified framework, thus avoiding tiresome trial-and-error loops.
This paper presents an automatic procedure to optimize the loaded tooth contact pattern of face-milled hypoid gears with misalignments varying within prescribed ranges. A two-step approach is proposed to solve the problem: in the first step, the pinion tooth microtopography is automatically modified to bring the perturbed contact patterns (as the assembly errors are varied within the tolerance limits) match a target area of the tooth while keeping them off the edges; in the second step, a subset of the machine-tool settings is identified to obtain the required topography modifications. Both steps are formulated and solved as unconstrained nonlinear optimization problems. While the general methodology is similar to the one recently proposed by the same authors for the optimization at nominal conditions, here, the robustness issues with respect to misalignment variations are considered and directly included in the optimization procedure: no a posteriori check for robustness is therefore required. Numerical tests show that nominally satisfactory and globally robust hypoid pairs can be designed by a direct process and within a unified framework, thus avoiding tiresome trial-and-error loops
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.