This paper presents the results of several investigations concerning the durability of mortar and concrete with higher proportion of calcined clays in the cement part. For this purpose, different clays based on kaolinite, montmorillonite and illite were fired at optimum temperatures according to the strength contribution in cement. The raw materials were analyzed chemically (XRF) and mineralogically (XRD). The pore size distribution of the mortars was measured by mercury intrusion porosimetry. Cement pastes were produced in order to calculate the phase composition by XRD/Rietveld and to estimate the microstructure with SEM. The performance tests comprised investigations of the long-term behaviour in case of sulphate attack and alkali silica reaction respectively. The results show that the addition of the calcined clays are able to improve the concrete resistance against these exposures or at least doesn't affect it negatively compared to the control. It can be followed that the application of cements with higher percentage of calcined clays substituting clinker is not restricted to only slightly loaded concrete constructions.
Flat lintels are an often used and effective method of bridging over wall openings. They consist of a composite system of tension chord and the overlying masonry, which is only considered in regulations in this combined construction. The special features of the construction and design are explained in the present article through the example of aerated concrete flat lintels, with the verification of loadbearing capacity being described and explained based on the latest regulations in technical approvals taking into account the relevant European structural design codes and their national annexes.
Die Helligkeit einer Oberfläche beeinflusst die thermische Belastung einer Beschichtung und des darunter liegenden Mauerwerks oder Dämmstoffs. Vor allem dunkle Flächen mit niedrigem Hellbezugswert (HBW) heizen sich unter Sonneneinstrahlung stark auf. Bei Anwendung auf hochwärmedämmenden Untergründen wie Porenbeton kann die entstehende Wärme nicht ausreichend schnell abgegeben werden. Die Folge sind thermisch bedingte Spannungen zwischen Beschichtung und Untergrund. Aus diesem Grund empfehlen Hersteller eine Limitierung des Hellbezugswertes. Untersuchungen der Xella Technologie‐ und Forschungsgesellschaft mbH zeigen jedoch, dass auch dunkle Beschichtungen mit äußerst geringem HBW unter extremen Klimabedingungen weder selbst Schaden nehmen noch Schaden an der Porenbeton‐Tragschicht verursachen. Somit scheint der HBW als Referenz zur Begrenzung der thermischen Spannungen ungeeignet. Für dunkle Flächen empfehlen Hersteller von Beschichtungen daher weiterhin die Berücksichtigung des solaren Reflexionsvermögens (TSR‐Wert). Dieser Wert erfasst im Gegensatz zum HBW das gesamte Energiespektrum des Sonnenlichts und stellt somit eine pigmentunabhängige Kenngröße zur Beurteilung des Erwärmungspotenzials einer Beschichtung dar. Entsprechende Grenzwertbetrachtungen sind Gegenstand aktueller Untersuchungen.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.