A nitretação por plasma é um tratamento termoquímico que modifica as propriedades superficiais de um determinado material. Este processo aplicado em aços ferramenta resulta no aumento da dureza da superfície através da formação da zona de difusão pelo controle das variáveis de tratamento, tais como a temperatura, composição química da atmosfera de trabalho e tempo de tratamento. Neste trabalho discute-se um procedimento alternativo para o tratamento térmico de revenimento. O qual possibilita a redução nos custos de fabricação, diminuição no consumo de energia e no tempo de confecção das ferramentas. Amostras de aço ferramenta VF 800 AT foram temperadas e revenidas (três vezes) pelo tratamento térmico convencional com posterior nitretação por plasma. Em cinco outros grupos de amostras realizou-se o revenimento concomitantemente ao tratamento de nitretação. A superfície e o núcleo das amostras foram caracterizados por difração de raios x, microscopia ótica, microscopia eletrônica de varredura, microdureza Vickers e dureza Rockwell C. Os resultados mostram que o gradiente térmico entre a superfície e o núcleo das amostras afeta a microestrutura, a dureza e as fases obtidas durante o tratamento térmico de revenimento simultâneo à nitretação. Entretanto, quando dois revenimentos são realizados em forno tipo Mufla e o último tratamento ocorre simultaneamente à nitretação, obtêm-se microestruturas, fases, dureza e microdureza semelhantes ao ciclo de tratamento térmico convencional com posterior nitretação por plasma. Palavras -chave:Aço ferramenta, nitretação por plasma, revenimento. ABSTRACTPlasma nitriding of tool steels improves the surface hardness due to formation of diffusion zone and/or compound layer. The process parameters such as temperature, gas composition and dwell time, allow us to control the layer thickness, the microstructure, the crystalline phases and the type of layer (for example white layer or diffusion zone). This paper discusses an alternative procedure for the heat treatment of tempering and surface treatment, both in plasma or combining conventional heat treatment with subsequent plasma nitriding. Carring out both treatments in plasma could enable reduction in manufacturing costs, lower energy consumption and less time for tools manufacturing. Samples of VF800AT steel were treated and characterized (at surface and core of samples) through the following technique: X-ray diffraction, optical microscopy, scanning electron microscopy, micro-hardness profile and Rockwell C measurement. Temperature measurements during the plasma treatment, show that arise thermal gradient between the surface and the core of the samples. In this work, it was observed that the surface was up to 7% hotter than the core of sample, during the plasma treatment with temperature of magnitude about 5 x 10 2 °C. This thermal gradient seems inherent to the plasma process, so that it can produce different microstructure, hardness and crystalline phases between core and edge of samples. However, when two tempering operations are...
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.