Resumo
IntroduçãoDiversas aplicações de soldagem de materiais dissimilares utilizando a interface aço inoxidável AISI 304 e inconel 600 têm sido desenvolvidas em vários segmentos [1]. Utilizações recentes de motores de apogeu instalados em satélites artificiais têm gerado uma demanda cada vez maior por injetores de alta confiabilidade, baixo peso e reduzido consumo de energia. Estes injetores, conforme pode ser observado na figura 1, devem possuir excelente estanqueidade, elevada precisão dimensional e alta complexidade geométrica e, portanto, devem ser produzidos por uma técnica de soldagem, que propicie uma pequena zona afetada pelo calor (ZAC).Sensores de pressão de diferentes geometrias são utilizados em usinas químicas e petroquímicas, com o objetivo de controlar fluxos, pressões e outros parâmetros, em tubulações e tanques de armazenamento. A função básica desses sensores é fornecer informações sobre os processos, facilitando sua automação. A soldagem de fechamento (selamento) é uma etapa crítica de fabricação e deve ocorrer sem distorção acentuada. Estas uniões, normalmente, de materiais dissimilares devem apresentar elevada estanqueidade e suportar condições agressivas. Usinas nucleares que utilizam tubulações com as interfaces inconel e
The use of metallurgical slags in cement production depends on the phases present in such slags, which are affected by changes in slag composition as well as the cooling rates adopted during solidification. In this work, slags with distinct chemical compositions were melted and subjected to different cooling conditions. Slag samples were characterized by X-ray diffraction to identify and quantify mineralogical phases and by X-ray fluorescence to determine chemical composition. The microstructure of the samples was characterized by scanning electron microscopy coupled to energy dispersive spectroscopy for phase identification. The solidification of the slags was simulated using FactSage TM for solidification path evaluation, enabling a comparison of the phases determined by thermodynamic equilibrium with those analysed in slag samples. Slags with low basicity (CaO/SiO 2 \1.25) and Al 2 O 3 content of 11 wt% exhibited a high glassy phase content depending on the cooling conditions. The phases formed in slags with higher basicity (1.4 and 3.8) were less affected by cooling rate and were different silicates, such as larnite, merwinite, monticellite, akermanite, gehlenite and melilite, whereas slags with basicity C1.37 exhibited RO phase (solid solution of FeO, MgO, CaO and MnO).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.