ABSTRACT:The terrestrial and mobile laser scanning has become nowadays a mature technology applied in several technical and non-technical applications. The transportation infrastructure can be surveyed by these technologies in an excellent way, then 3D maps, fly-through videos and road furniture inventories can be derived among many other applications. The very detailed measurement and the realistic feature enable even to be used in games or simulators. This advantage was to be analyzed in vehicular simulation environment; the primary goal of the paper was to demonstrate a potential workflow and use case for such laser scanning data. The selected simulation package was the OpenCRG, which is being a component of OpenDRIVE-OpenCRG-OpenSCENARIO system, where it has been developed for microscopic simulations, e.g. vibrations, tire models or vehicle suspension systems. Because of the realistic visualization of CRG models it is very popular in the design and development of autonomous vehicles. The paper presents two different paved pilot sites surveyed by these technologies, then the raw data preparation is described and the details of the CRG model building is shown. The results of the experiments bring an overview, how the captured field data can be represented and interpreted in road surface context. The diagrams illustrate the potential of the very high resolution (1 cm) model, which allows to identify each separate cobble stone or to study surface roughness.
The vehicles of the conditional, high, and full automation levels have a common unique sensor, the map. The term map has undergone a significant change because the spatial resolution has been increased considerably, the road infrastructure and its neighborhood are represented with higher accuracy in 3D. The development of these vehicles requires enormous efforts, where computer-based techniques, like the simulations, can offer a helping hand. The autonomous simulations will be supported by high-quality map information, which generates interest in the best field data-capturing techniques. The paper provides an overview of the available modern surveying methodologies, then introduces the most preferred data formats – both in physical information storage and in exchanging information content between mapping systems. Some examples are presented to demonstrate the usage of the relevant map-making outputs in automotive simulators.
The development of autonomous vehicles nowadays is attractive, but a resource-intensive procedure. It requires huge time and money efforts. The different carmakers have therefore common struggles of involving cheaper, faster and accurate computer-based tools, among them the simulators. Automotive simulations expect reality information, where the recent data collection techniques have excellent contribution possibilities. Accordingly, the paper has a focus on the use of mobile laser scanning data in supporting automotive simulators. There was created a pilot site around the university campus, which is a road network with very diverse neighborhood. The data acquisition was conducted by a Leica Pegasus Two mobile mapping system. The achieved point clouds and imagery were submitted to extract road axes, road borders, but also lane borders and lane markings. By this evaluation, the OpenDRIVE representation was built, which is directly transferrable into various simulators. Based on the roads' geometric description, a standardized pavement surface model was created in OpenCRG format. CRG is a Curved Regular Grid, containing all surface height information and objects, but also anomalies. The 3D laser point clouds could easily be transformed into voxel models, then these models can be projected onto two vertical roadside grids (ribbons), which are practically an extension to the OpenCRG model. Adequate visualizations demonstrate the obtained results.
Automated road transport systems (ARTS) are based on the use of fully automated road vehicles controlled by a centralized system for fleet and infrastructure management. ARTS are aimed (at least at the beginning) at supplementing mass transit in the last mile and are commercially available today. However, their deployment is limited at the moment to protected or special roads. In urban areas, where these systems can be most beneficial, they cannot be implemented because of the absence of an adapted legal framework. The CityMobil2 project, financed by the European Commission, aims to remove the legal barriers that prevent the deployment of ARTS in urban areas by developing a specific legal framework. Previous experience based on risk assessment and failure mode, effects, and criticality analysis has demonstrated acceptability to national authorities. On this basis, the CityMobil2 project has started developing a methodology for the certification of full ARTS, aimed at guaranteeing an adequate level of safety. The certification framework has been developed at the theoretical level, but during the next phases of the CityMobil2 project, it will be tested in real-world conditions during the ARTS demonstrations that will be organized in several cities of Europe to make this methodology a major reference for a future legal framework.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.