The theory behind and operation of an electroosmotically induced hydraulic pump for microfluidic devices is reported. This microchip functional element consists of a tee intersection with one inlet channel and two outlet channels. The inlet channel is maintained at high voltage while one outlet channel is kept at ground and the other channel has no electric potential applied. A pressure-induced flow of buffer is created in both outlet channels of the tee by reducing electroosmosis in the ground channel relative to that of the inlet channel. Spatially selective reduction of electroosmosis is accomplished by coating the walls of the ground channel with a viscous polymer. The pump is shown to differentially transport ions down the two outlet channels. This ion discrimination ability of the pump is examined as a function of an analyte's electrophoretic velocity. In addition, we demonstrate that an anion can be rejected from the ground channel and made to flow only into the field-free channel if the electrophoretic velocity of the anion is greater than the pressure-generated flow in the ground channel. The velocity threshold at which anion rejection occurs can be selectively tuned by changing the flow resistance in the field-free channel relative to the ground channel.

Rapid protein digestion and analysis using a hybrid microchip nanoelectrospray device and time-of-flight mass spectrometry detection are reported. The device consists of a planar glass chip with microfabricated channels coupled to a disposable nanospray emitter. Reactions between substrate and enzyme (trypsin), mixed off-chip and then immediately loaded into a sample reservoir on the device, are monitored in real time following the onset of electrospray. Protein cleavage products are determined at the optimum pH for generating tryptic fragments, directly from the digestion buffer using "wrong-way-round" electrospray, i.e., monitoring (MH)+ ions from basic solutions. Intense tryptic peptide ions are observed within a few minutes following sample loading on the microchip. Proteins were identified from low femtomole or even attomole quantities of analyte/spectrum using peptide mass fingerprinting, loading 0.1-2 pmol/microL of sample on the chip. The sequence coverage for analyzed proteins ranged from 70 to 95%. The rapid analysis of human hemoglobin is demonstrated using the technique.