Developing efficient catalyst for CO oxidation at low-temperature is crucial in various industrial and environmental remediation applications. Herein, we present a versatile approach for controlled synthesis of carbon nitride nanowires (CN NWs) doped with palladium and copper (Pd/Cu/CN NWs) for CO oxidation reactions. This is based on the polymerization of melamine by nitric acid in the presence of metal-precursors followed by annealing under nitrogen. This intriguingly drove the formation of well-defined, one-dimensional nanowires architecture with a high surface area (120 m2 g−1) and doped atomically with Pd and Cu. The newly-designed Pd/Cu/CN NWs fully converted CO to CO2 at 149 °C, that was substantially more active than that of Pd/CN NWs (283 °C) and Cu/CN NWs (329 °C). Moreover, Pd/Cu/CN NWs fully reserved their initial CO oxidation activity after 20 h. This is mainly attributed to the combination between the unique catalytic properties of Pd/Cu and outstanding physicochemical properties of CN NWs, which tune the adsorption energies of CO reactant and reaction product during the CO oxidation reaction. The as-developed method may open new frontiers on using CN NWs supported various noble metals for CO oxidation reaction.

(E)-2-((benzo[d]thiazol-2-ylimino)methyl)-4-nitrophenol 1 and (E)-2-(((6-methoxybenzo[d]thiazol-2-yl)imino)methyl)-4-nitrophenol 2 were synthesized efficiently under microwave conditions. The structures were confirmed using IR, 1H NMR, and 13C NMR. UV-vis. Fluorescence investigations demonstrated that 1 and 2 are sensitive and selective sensors for detection of cyanide over all other anions SCN−, AcO−, N3−, H2PO4−, H2AsO4−, F−, Cl−, Br−, and I− in aqueous media. Cyanide induces colorimetric change from pale yellow to dark yellow and from transparent to pale yellow for 1 and 2, respectively. It enhances the absorption at wavelengths 385 nm and 425 nm of 1 and 385 nm and 435 nm of 2. Acidic anions H2PO4− and H2AsO4− displayed significant interference with the interaction of cyanide and sensors 1 and 2. Sensor 1 has lower detection limit (LDL) 1 × 10−6 M, while 2 has LDL 1.35 × 10−6 M.