Penyuluhan dan sosialisasi penggunaan Alat Pelindung Diri (APD) merupakan salah satu usaha untuk menunjang Keselamatan dan Kesehatan Kerja. Bengkel las “Jaya Mandiri” merupakan mitra kegiatan yang memerlukan hal tersebut. Tujuan kegiatan yaitu untuk meningkatkan kesadaran dan ketrampilan akan pentingnya penggunaan APD saat bekerja. Untuk itu pembuatan SOP dalam penggunaan APD menjadi prosedur wajib untuk memulai suatu pekerjaan. Metode yang digunakan yaitu penyuluhan dan peragaan penggunaan APD kemudian dilanjutkan dengan penggunaan APD saat bekerja. Hasil kegiatan di analisa menggunakan skala Likert. Setelah itu dilakukan penetapan SOP dan metode pengawasan oleh pemilik bengkel dalam penggunaan APD sehingga menjadi pembiasaan agar membudaya. Hasil yang didapat setelah penyuluhan dan peragaan APD yaitu terjadi peningkatan pemahaman dan ketrampilan dalam penggunaan APD dari karyawan. Dari hasil analisi skala Likert menunjukkan yang tertinggi adalah penggunaan helm pengaman pengelasan setelah penyuluhan 74,29 % dari sebelumnya rerata 31,43 %. Hasil yang terendah adalah penggunaan clemek (Apron) 57,14% sebelumnya 22,86%. Ditemukan juga salah satu karyawan yang memiliki pemahaman dan ketrampilan paling tinggi dalam penggunaan seluruh APD yaitu Munahar mencapai 84% setelah penyuluhan dari sebelumnya hanya 40%, Dari hasil wawancara ternyata Munahar ini adalah tamatan SMK dan sudah mendapatkan pelatihan di BLK. Ketrampilan dan kedisiplinan karyawan dalam penggunaan APD masih perlu di tingkatkan dengan cara pengawasan oleh pemilik UKM. Tim pelaksana pengabdian bersama pemilik bengkel dan karyawan sepakat membuat SOP dalam mengawasi mengawasi penggunaan APD untuk menunjang K3 sehingga menjadi kebiasaan yang baik serta membudaya.
This study aims to investigate the hardness properties of materials made of a mixture of aluminum, copper, and silicon carbide powders. The product has been made of mixtures aluminium (Al), copper (Cu) and silicon carbide (SiC) powders with a concentration of 80; 15; 5 (% wt), respectively. Manufacture of the specimens was conducted used powder metallurgy. The dimension of the specimens’ diameter of 25 mm and a thickness of 4 mm. The variation of the temperature sintering is 320, 420 and 520 oC for 40 minutes. The hardness properties have analyzed using the Brinell method. The results show that at the temperature range 320 - 420 oC, the hardness of the specimen increase to 15.2 BHN; it is due to the bond between metal powders is formed strong enough. Conversely, at 520 oC the hardness number is low because most of SiC is bound weakly to other powders. It can be concluded that the selection of temperature and sintering time and proper mixing greatly influence the hardness properties of materials yields of powder metallurgical.
The product resulting from the powder metallurgy process has advantages in terms of mechanical properties and physical properties. Material engineering by mixing several types of metal powders is very possible to do. The composition of this powder metallurgical process material is a mixture of aluminum powder (80%), copper powder (15%) and silicon carbide powder (5%) by weight then compacted with a compaction load gradually, starting with a load of 3 tons, holding for 3 minutes, followed by a load of 3 tons. 4 tons were held for 3 minutes and the last 5 tons were held for 3 minutes by pre sintering 1250C. Sintering in the kitchen with temperature variations of 4500C, 5000C and 5500C and sintering time for 60 minutes. Tests carried out on the specimens were hardness tests using the Rockwell (HRF) method. The results showed that the hardness of a single material has a hardness of around 35 HRF. The average hardness of the mixed material at a sintering temperature of 4500C is 80 HRF. The hardness of the mixed material at a sintering temperature of 5000C on average is 74 HRF. Meanwhile, the hardness of the mixed material at a sintering temperature of 5500C averaged 52 HRF. It can be concluded that the application of heat at the time of compaction and the selection of the sintering temperature greatly affect the hardness of the product resulting from the powder metallurgy process.
PENDAHULUANIndonesia pada saat ini sedang gencar mencanangkan program pemanfaatan limbah sebagai bahan bakar guna memenuhi kebutuhan energi di masa mendatang. Pengembangan yang dilakukan salah satunya adalah pemanfaatan biomassa dari limbah pertanian yang merupakan limbah padat dimanfaatkan lagi sebagai bahan bakar. Sifat dari biomassa ini pun sangat menguntungkan karena merupakan sumber
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.