This work has been focused on the one-step fabrication by electrospinning of polyamide 6 (PA6) nanofibre membranes modified with titanium dioxide nanoparticles (TiO2), where these TiO2 nanoparticles aggregates could induce a photocatalytic activity. The main potential application of these membranes could be the purification of contaminated water. Thus, it is important to analyse the contaminant degradation capability since in these membranes this is based on their photocatalytic activity. In this work, the effect of the photocatalysis has been studied both on the degradation of an organic model contaminant and on the removal of Escherichia coli and other coliform bacteria. As a result, it was observed that these membranes present excellent photocatalytic activity when they are irradiated under UV light, allowing a 70% reduction of an organic model pollutant after 240 min. In addition, these membranes successfully removed Escherichia coli and other coliform bacteria in artificially inoculated water after 24 h of contact with them. Moreover, the stand-alone structure of the membranes allowed for the reusing of the immobilized catalyst. The experimental evidence indicated that developed nanofibre membranes are a fast and efficient solution for polluted water decontamination based on photocatalysis. Their use could contribute to guarantee a fresh water level and quality, mitigating the water scarcity problem worldwide.

Delamination and brittle matrix fracture have long since been the biggest problems in fibre-reinforced composites. Recently, the incorporation of electrospun nanofibre veils has been shown to be an effective method for improving the mechanical properties of these composites, without causing process problems and negatively affecting other mechanical properties. Thus, these nanofibres have the potential to be used as thickness-reinforcing materials in composites. This paper investigates the effect of incorporating standalone electrospun nanofibre veils made of two different types of polyamide 6 (PA6) on the mechanical properties of carbon fibre/epoxy composites. The influence of positioning the electrospun veils at different interlaminar positions of the laminate has also been investigated.

Porous materials have become ideal candidates for the creation of optical sensors that are able to reach extremely high sensitivities, due to both the possibility to infiltrate the target substances on them and to their large surface-to-volume ratio. In this work, we present a new alternative for the creation of porous optical sensors based on the use of polymeric nanofibers (NFs) layers fabricated by electrospinning. Polyamide 6 (PA6) NFs layers with average diameters lower than 30 nm and high porosities have been used for the creation of Fabry-Pérot optical sensing structures, which have shown an experimental sensitivity up to 1060 nm/RIU (refractive index unit). This high sensitivity, together with the low production cost and the possibility to be manufactured over large areas, make NFs-based structures a very promising candidate for the development of low-cost and high performance optical sensors.

The inclusion of electrospun nanofiber veils was revealed as an effective method for enhancing the mechanical properties of fiber-reinforced epoxy resin composites. These veils will eventually allow the incorporation of nanomaterials not only for mechanical reinforcement but also in multifunctional applications. Therefore, this paper investigates the effect of electrospun nanofibrous veils made of polyamide 6 modified with TiO2 nanoparticles on the mechanical properties of a carbon-fiber/epoxy composite. The nanofibers were included in the carbon-fiber/epoxy composite as a single structure. The effect of positioning these veils in different composite positions was investigated. Compared to the reference, the use of unmodified and TiO2 modified veils increased the flexural stress at failure and the fracture toughness of composites. When TiO2 modified veils were incorporated, new antibacterial properties were achieved due to the photocatalytic properties of the veils, widening the application area of these composites.

Hybrid nanofibers containing CdSe/ZnS quantum dots have been produced by electrospinning of hybrid latexes to characterize the electro-optical behavior of this novel luminescent sensing material. The latexes are synthesized by seeded semi-batch emulsion polymerization yielding crosslinked core-shell PS/QDs/PMMA particles with efficiently encapsulated quantum dots guaranteeing a good optical stability. Addition of polyvinyl alcohol (PVA) or polyethylene oxide (PEO) to the latexes is necessary to produce polymeric dispersions suitable for electrospinning manufacture of the nanometric fibers. The optimized polymeric dispersions are successfully electrospun obtaining fluorescent nanofibers in both cases. The hybrid nanofibers are sensitive to selected solvents (acetone, methanol and THF) and present positive response making them good candidates for the production of VOC sensors.

Highlights  Graphene quantum dots/polyacrylonitrile membranes were prepared by electrospinning  GQD-PAN filters are turn-off fluorescence sensors for free chlorine detection  Membranes have fast sensing response to chlorine concentration (10-600 M range)  Filters show high sensitivity (DL=2 M detection limit), reproducibility (< 5% RSD) and selectivity  Filters sensing response was stable after months immersed in buffer solutions *

Porous materials have demonstrated to be ideal candidates for the creation of optical sensors with very high sensitivities. This is due both to the possibility of infiltrating the target substances into them and to their notable surfaceto-volume ratio that provides a larger biosensing area. Among porous structures, polymeric nanofibers (NFs) layers fabricated by electrospinning have emerged as a very promising alternative for the creation of low-cost and easy-to-produce high performance optical sensors, for example, based on Fabry-Pérot (FP) interferometers. However, the sensing performance of these polymeric NFs sensors is limited by the low refractive index contrast between the NFs porous structure and the target medium when performing in-liquid sensing experiments, which determines a very low amplitude of the FP interference fringes appearing in the spectrum. This problem has been solved with the deposition of a thin metal layer (∼ 3 nm) over the NFs sensing layer. We have successfully used these metal-coated FP NFs sensors to perform several real-time and in-flow refractive index sensing experiments. From these sensing experiments, we have also determined that the sponge-like structure of the NFs layer suffers an expansion/compression process that is dependent of the viscosity of the analyzed sample, what thus gives the possibility to perform a simultaneous dual sensing of refractive index and viscosity of a fluid.

In order to increase the sensitivity of a sensor, the relationship between its volume and the surface available to be functionalized is of great importance. Accordingly, porous materials are becoming very relevant, because they have a notable surface-to-volume ratio. Moreover, they offer the possibility to infiltrate the target substances on them. Among other porous structures, polymeric nanofibers (NFs) layers fabricated by electrospinning have emerged as a very promising alternative to low-cost and easy-to-produce high-performance photonic sensors. However, experimental results show a spectrum drift when performing sensing measurements in real-time. That drift is responsible for a significant error when trying to determine the refractive index variation for a target solution, and, because of that, for the detection of the presence of certain analytes. In order to avoid that problem, different chemical and thermal treatments were studied. The best results were obtained for thermal steps at 190 °C during times between 3 and 5 h. As a result, spectrum drifts lower than 5 pm/min and sensitivities of 518 nm/refractive index unit (RIU) in the visible range of the spectrum were achieved in different electrospun NFs sensors.