Summary Many metallurgical processes produce characteristic dislocation accumulation, with heterogeneous spatial and orientation distributions and further development of microstructures after heat treatment. Recovery and recrystallisation behaviours are direct consequences of those uneven dislocation distributions. The Electron BackScatter Diffraction (EBSD) technique can be used for the characterisation of such microstructural features, including: Density of Geometrically Necessary Dislocations (GND), Kernel Average Misorientations (KAM), Grain Orientation Spread (GOS), Grain Average Misorientation (GAM), Grain Reference Orientation Deviation (GROD – Angle) and GOS/D, where D is an assumed characteristic grain length. Production of Fe3%Si alloys with a Goss texture, essential step in the manufacture of electrical transformers, requires several different processing stages, including the one called primary recrystallisation, a key process preceding abnormal grain growth. The structure of grains and different microstructural aspects of the recrystallisation stage will provide the conditions for development of the Goss orientation during abnormal grain growth. In the present work we use GOS, GAM, GROD, GOS/D, GND and KAM, calculated from EBSD scans performed on cold rolled Fe3%Si alloys subject to increasing heat treatment times, to characterise the kinetics of recovery and primary recrystallisation in an Fe3%Si alloy. Difficulties in the interpretation of these results may arise from the interactive competition between various microstructural features. Hardness measurements were also performed in order to validate recovery and recrystallisation evolution by classical methods. It was found that the global GOS (i.e. including grains of all orientations) shows changes which can be related to those observed in the hardness for high annealing temperatures but it is not sensitive to microstructure evolution occurring at low temperatures. Meanwhile, GND undergoes changes at all annealing temperatures and, remarkably, it responds to the recovery that GOS cannot detect at low temperatures. The GAM parameter seems to follow better the microhardness results. When grains belonging to different texture components are analysed, gamma fibre grains are the first to recrystallise and alpha fibre grains the last. Lay Description Many metallurgical processes produce characteristic dislocation accumulation, with heterogeneous spatial and orientation distributions. Further development of such microstructures occurs with subsequent heat treatments. Recovery and recrystallisation behaviours are directly affected by consequences of those uneven dislocation distributions. The Electron Back Scatter Diffraction (EBSD) technique can be used for the characterisation of such microstructural features using different magnitudes that describe locally or globally misorientations between various locations in the material. In search of the best parameters [among them: Density of Geometrically Necessary Dislocations (GND), Kernel Average Misorientatio...
Abstract. Anisotropy of physical and mechanical properties of textured polycrystalline materials strongly depends on microstructural characteristics, such as subgrain sizes, lattice deformations, etc. Generalized Pole Figures (GPF) are an attempt to estimate the anisotropy of these properties; so, the energy stored during plastic deformation is a key parameter in primary recrystallization. In this work, the technique to measure GPF (measurements and software) was implemented for X-Ray diffraction and applied to study of property anisotropy of a Fe50%Ni alloy. GPF’s of texture, crystallite size, stored energy and diffraction peak shift, (among others) have been characterized. The Full Width at Half Maximum (FWHM) of obtained instrumental functions shows that defocusing is significant for polar angle higher than 50°. The mixing parameter of the pseudo-Voigt function using in fitting, presents important dispersions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.