Environmental issues make the quest for better and cleaner energy sources a priority. Worldwide, researchers and companies are continuously working on this matter, taking one of two approaches: either finding new energy sources or improving the efficiency of existing ones. Hydrogen is a well-known energy carrier due to its high energy content, but a somewhat elusive one for being a gas with low molecular weight. This review examines the current electrolysis processes for obtaining hydrogen, with an emphasis on alkaline water electrolysis. This process is far from being new, but research shows that there is still plenty of room for improvement. The efficiency of an electrolyzer mainly relates to the overpotential and resistances in the cell. This work shows that the path to better electrolyzer efficiency is through the optimization of the cell components and operating conditions. Following a brief introduction to the thermodynamics and kinetics of water electrolysis, the most recent developments on several parameters (e.g., electrocatalysts, electrolyte composition, separator, interelectrode distance) are highlighted.
Green hydrogen production seems to be the best route to achieve a sustainable alternative to fossil fuels, as hydrogen has the highest energy density on a mass basis and its combustion does not produce greenhouse gases. Water electrolysis is the method of choice for producing green hydrogen. Among commercially available water electrolysis systems, alkaline water electrolysis (AWE) is the most well-established technology, which, nevertheless, still needs to improve its efficiency. Since the electrodes’ performance is of utmost importance for electrolysis efficiency, nickel foam (NF) and stainless steel foam (SSF) electrodes were analyzed via voltammetry to validate their catalytic activity toward the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in 30 wt.% NaOH electrolyte solution. Moreover, at a current density of 50 mA cm−2, the NF and the SSF exhibited good stability, with the potential for HER and OER stabilizing at −0.5 V and 1.6 V vs. reversible hydrogen electrode. A lab-scale electrolyzer attained current densities of 10, 20, and 50 mA cm−2 at small cell voltages of 1.70 V, 1.80 V, and 1.95 V. The results validated NF and SSF as electrodes for a high-performance AWE electrolyzer, especially at higher temperatures. They ensured the progress for the project’s next stage, i.e., constructing an electrolyzer at a pilot scale.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.