The bioactive compounds in myrtle berries, such as phenolic compounds and anthocyanins, have shown a potentially positive effect on human health. Efficient extraction methods are to be used to obtain maximum amounts of such beneficial compounds from myrtle. For that reason, this study evaluates the effectiveness of a rapid ultrasound-assisted method (UAE) to extract anthocyanins and phenolic compounds from myrtle berries. The influence of solvent composition, as well as pH, temperature, ultrasound amplitude, cycle and solvent-sample ratio on the total phenolic compounds and anthocyanins content in the extracts obtained were evaluated. The response variables were optimized by means of a Box-Behnken design. It was found that the double interaction of the methanol composition and the cycle, the interaction between methanol composition and temperature, and the interaction between the cycle and solvent-sample ratio were the most influential variables on the extraction of total phenolic compounds (92.8% methanol in water, 0.2 s of cycle, 60 °C and 10:0.5 mL:g). The methanol composition and the interaction between methanol composition and pH were the most influential variables on the extraction of anthocyanins (74.1% methanol in water at pH 7). The methods that have been developed presented high repeatability and intermediate precision (RSD < 5%) and the bioactive compounds show a high recovery with short extraction times. Both methods were used to analyze the composition of the bioactive compounds in myrtle berries collected from different locations in the province of Cadiz (Spain). The results obtained by UAE were compared to those achieved in a previous study where microwave-assisted extraction (MAE) methods were employed. Similar extraction yields were obtained for phenolic compounds and anthocyanins by MAE and UAE under optimal conditions. However, UAE presents the advantage of using milder conditions for the extraction of anthocyanins from myrtle, which makes of this a more suitable method for the extraction of these degradable compounds.

No abstract

The phenolic compounds and anthocyanins present in myrtle berries are responsible for its beneficial health properties. In the present study, a new, microwave-assisted extraction for the analysis of both phenolic compounds and anthocyanins from myrtle pulp has been developed. Different extraction variables, including methanol composition, pH, temperature, and sample–solvent ratio were optimized by applying a Box–Behnken design and response surface methodology. Methanol composition and pH were the most influential variables for the total phenolic compounds (58.20% of the solvent in water at pH 2), and methanol composition and temperature for anthocyanins (50.4% of solvent at 50 °C). The methods developed showed high repeatability and intermediate precision (RSD < 5%). Both methods were applied to myrtle berries collected in two different areas of the province of Cadiz (Spain). Hierarchical clustering analysis results show that the concentration of bioactive compounds in myrtle is related to their geographical origin.

The aim of the present study was to compare and analyze the impact of using bee pollen doses (0.1, 0.25, 1, 5, 10 and 20 g/L) as activator in the alcoholic fermentation process of Palomino fino and Riesling wines. In this regard, its influence on the musts composition, the fermentative kinetics, the evolution of the populations of Saccharomyces cerevisiae, the evolution of yeast-assimilable nitrogen and physico-chemical characteristics of final wines has been analyzed. Bee pollen addition produces significant increases in yeast-assimilable nitrogen and maximum yeasts population and exponential velocity reached during alcoholic fermentation. Bee pollen showed an important effect on yeast survival during the death phase. Final wines showed significantly increase in volatile acidity above doses higher than 10 g/L and Comisión Internacional de L’Eclairage parameters (CIELab), color intensity and Abs 420 nm, from 1 g/L. Therefore, pollen could be used as fermentative activator for the alcoholic fermentation of white wines applying doses below of 1 g/L.

The ontogenetic variation of total and individual capsaicinoids (nordihydrocapsaicin (n-DHC), capsaicin (C), dihydrocapsaicin (DHC), homocapsaicin (h-C) and homodihydrocapsaicin (h-DHC)) present in Malagueta pepper (Capsicum frutescens) during fruit ripening has been studied. Malagueta peppers were grown in a greenhouse under controlled temperature and humidity conditions. Capsaicinoids were extracted using ultrasound-assisted extraction (UAE) and the extracts were analyzed by ultra-performance liquid chromatography (UHPLC) with fluorescence detection. A significant increase in the total content of capsaicinoids was observed in the early days (between 12 and 33). Between day 33 and 40 there was a slight reduction in the total capsaicinoid content (3.3% decrease). C was the major capsaicinoid, followed by DHC, n-DHC, h-C and h-DHC. By considering the evolution of standardized values of the capsaicinoids it was verified that n-DHC, DHC and h-DHC (dihydrocapsaicin-like capsaicinoids) present a similar behavior pattern, while h-C and C (capsaicin-like capsaicinoids) show different evolution patterns.

The production of white wines with the presence of grape skins is a historical technique used in different regions with winemaking tradition. However, the current trend is to maintain the presence of grape skins during white wine making only during the pre-fermentation phase in order to enrich and give greater complexity to the sensory profile of the wines. Given these precedents, this study is the first to consider the effect of the presence of different grape skins doses throughout the alcoholic fermentation process. To this end, the effect of 5 different doses of grape skins (20, 40, 60, 80 and 100%) has been studied with respect to a control (0%) during alcoholic fermentation, the physicochemical composition of the final wines and a preliminary sensory analysis. The presence of grape skins has led to an increase in viable biomass and speed of fermentation with respect to the control. However, no differences have been observed in terms of the consumption of nitrogenous sources by yeasts. The wines produced have not shown great differences in their physicochemical composition, except for the volatile acidity. In addition, the preliminary sensory analysis showed differences between the different grape skins doses studied, where the wine produced with 20% grape skins has been the best evaluated by the tasting panel. In this sense, the production of wines with a 20% grape skins presence during the entire alcoholic fermentation is presented as a viable technique that would allow the diversification of the production of white wines and meet the trends and expectations of current wine consumers.

Flor velum yeast growth activators during biological aging are currently unknown. In this sense, this research focuses on the use of bee pollen as a flor velum activator. Bee pollen influence on viable yeast development, surface hydrophobicity, and yeast assimilable nitrogen has already been studied. Additionally, bee pollen effects on the main compounds related to flor yeast metabolism and wine sensory characteristics have been evaluated. “Fino” (Sherry) wine was supplemented with bee pollen using six different doses ranging from 0.1 to 20 g/L. Its addition in a dose equal or greater than 0.25 g/L can be an effective flor velum activator, increasing yeast populations and its buoyancy due to its content of yeast assimilable nitrogen and fatty acids. Except for the 20 g/L dose, pollen did not induce any significant effect on flor velum metabolism, physicochemical parameters, organic acids, major volatile compounds, or glycerol. Sensory analysis showed that low bee pollen doses increase wine’s biological aging attributes, obtaining the highest score from the tasting panel. Multiflora bee pollen could be a natural oenological tool to enhance flor velum development and wine sensory qualities. This study confirms association between the bee pollen dose applied and the flor velum growth rate. The addition of bee pollen could help winemakers to accelerate or reimplant flor velum in biologically aged wines.

The high sensitivity of one of the most important crops in the world, such as vine (Vitis vinifera L.), to particular changes caused by the phenomena associated with global warming, is encouraging the wine industry to place value on grape varieties that are autochthonous to each production area. These are generally conserved in germplasm banks and may pose a useful tool to counteract the effects of climate change. In order to determine the actual resource that such varieties constitute, this research has carried out a genetic identification, a morphological characterization, and an analysis of the grape musts obtained from four autochthonous varieties (Cañocazo, Castellano, Mantúo de Pilas, and Palomino Fino). This genetic analysis has allowed the identification of autochthonous varieties with different genotypes. However, all of them had similar phenotypic characteristics in terms of high hair density in adult leaves. With respect to the physicochemical composition of the musts, significant differences have been observed between the autochthonous varieties, with respect to the control variety of Palomino Fino. Nevertheless, all of them have exhibited an adequate physicochemical composition to produce quality white wines. For all of the above reasons, these local varieties should be considered suitable for cultivation in areas with warmer and drier climates, such as Andalusia (Spain).