Acidolysis is emerging as a promising method for recycling polyurethane foam (PUF) waste. Here, we present highly efficient acidolysis of PUFs with adipic acid (AA) by heating the reaction mixtures with microwaves. The influence of experimental conditions, such as reaction temperature, time, and amount of the degradation reagent, on the polyol functionality, molecular weight characteristics, the presence of side products, and the degree of degradation of the remaining PUF hard segments was studied by matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS), nuclear magnetic resonance (NMR), size-exclusion chromatography (SEC) coupled to a multidetection system, and Fourier transform infrared (FT-IR) spectroscopy. The purified recycled polyols were used for the synthesis of flexible PUFs. The morphology and mechanical properties of the PUFs show that the degree of functionalization of the polyol by the carboxylic end groups, which is higher for larger amounts of AA used to degrade the PUFs, significantly affects the quality and performance of the flexible PUFs from the recycled polyols.

Purpose River ecosystems are under pressure from several different stressors. Among these, inorganic pollutants contribute to multiple stressor situations and the overall degradation of the ecological status of the aquatic environments. The main sources of pollution include different industrial activities, untreated effluents from municipal waste waters and intensive agriculture. In the present study, water, suspended particulate matter (SPM) and sediments of the Sava River were studied in order to assess the pollution status of this river system. Materials and methods Sampling was performed during the first sampling campaign of the EU 7th FW funded GLOBAQUA project in September 2014, at 18 selected sampling sites along the Sava River. In 2014, floods predominated from spring to fall. Water samples were collected to determine the total element concentrations, the dissolved (0.45 μm) fraction and element concentrations in SPM. In order to assure comparative results with other river basins, the fraction below 63 μm was analysed in sediments. The extent of pollution was estimated by determination of the total element concentrations and by the identification of the most hazardous highly mobile element fractions (extraction 0.11 mol L −1 acetic acid) and anthropogenic inputs of elements to sediments (normalization to aluminium (Al) concentration). Concentrations of selected elements were determined by inductively coupled plasma mass spectrometry (ICP-MS). Results and discussion Since during sampling campaign the water level was extremely high, water samples contained high amounts of SPM (in general between 80 and 100 mg L −1). The data of chemical analysis revealed that concentrations of elements in water, SPM and sediments in general increase along the Sava River from its origin to the confluence with the Danube River. Elevated concentrations of chromium (Cr) and nickel (Ni) in SPM and sediments were observed at industrially exposed sites. Concentrations of Cr and Ni in sediments were up to 320 and 250 mg kg −1 , respectively. Nevertheless, these elements were present in sparingly soluble forms and hence did not represent an environmental threat. Phosphorus (P) was found in elevated concentrations (up to 1500 mg kg −1) at regions with intensive agricultural activities and cities with dense population. Conclusions With respect to element concentrations, the pollution of the Sava River is similar to other moderately polluted European rivers. The data from the present study are beneficial for the water management authorities and can contribute to sustainable utilization, management and protection of the Sava River water resources.

Flay ash, cement and electric arc furnace (EAF) dust are frequently mixed in building composites. From them, chromium (Cr), arsenic (As), molybdenum (Mo) and vanadium (V) may be leached. Concentrations of V in leachates may be significantly higher than those of Cr, As and Mo, making simultaneous speciation analysis particularly difficult. In this work, a high performance liquid chromatography inductively coupled plasma mass spectrometry (HPLC-ICP-MS) procedure was used for simultaneous speciation of chromate, arsenate, molybdate and vanadate. First, the behaviour of Cr, As, Mo and V species in different oxidation states was studied during their separation under acidic (pH 5) and alkaline (pH 12) conditions. At alkaline pHs chromate, arsenate, molybdate and vanadate were simultaneously separated and eluted at retention times from 390 to 450 s, 230 to 270 s, 340 to 430 s and 270 to 380 s, respectively and detected on-line by ICP-MS, recording m/z 52, 75, 95 and 51, respectively. When V species were leached in significantly higher concentrations than Cr, Mo and As, their detection was possible at the low abundance (0.25%) 50 V isotope, which is also the mass of the 50 Cr isotope (abundance 4.345%), due to selective separation between V and Cr species. Good repeatability of measurement (RSD better than AE3.0%) and quantitative elution of elemental species (column recoveries 99-105%) were obtained. Finally, the procedure was applied in the simultaneous speciation analysis of chromate, arsenate, molybdate and vanadate in highly alkaline aqueous leachates from composites consisting of fly ash, cement and EAF dust that contained a wide range of concentrations of vanadate.