RESUMO -O carvão rio-grandense apresenta potencial para o processo de gaseificação. Tal processo gera cinzas como resíduo. Em vista de sua grande disponibilidade, este trabalho visa o estudo do potencial de adsorção da cinza leve da gaseificação para o tratamento de efluentes. Para isto, realizaram-se ensaios de cinética e isotermas de adsorção utilizando uma solução de azul de metileno a 300 mg L -1 . As amostras foram agitadas, centrifugadas e, posteriormente, realizou-se a leitura das absorbâncias em espectrofotômetro UV-Vis. A partir dos dados obtidos realizaram-se ajustes aos modelos cinéticos de pseudo 1ª ordem, pseudo 2ª ordem e difusão intrapartícula e aos modelos de isoterma de Langmuir, Freundlich, Temkin e Sips. Para a cinética o modelo de pseudo 2ª ordem apesentou um melhor ajuste com R 2 de 0,98 e qe de 14,3 mg g -1 . Já para as isotermas, tanto o modelo de Langmuir quanto o de Freundlich mostraram-se satisfatórios. Ressalta-se que a cinza apresentou um potencial de adsorção com um máximo de 99,95%.
INTRODUÇÃONo Brasil, a maior parte das reservas de carvão mineral se encontram no sul do país. Os carvões sulbrasileiros possuem um baixo poder calorífico (3300 kcal/kg) e alto teor de enxofre (1,3% em massa) e de cinzas (51,4% em massa). Sendo assim, não são ideais para a utilização em termelétricas, mas são indicados para o processo de gaseificação (Garcia, 2002; Aneel, 2008; Rohde e Machado, 2016).A gaseificação é um processo no qual o carvão reage com um oxidante resultando em um produto combustível. São gerados o syngas, alcatrão de carvão e cinzas (Smoot e Smith, 1985). As cinzas são resíduos sólidos provenientes da eliminação dos compostos voláteis do carvão e podem ser leves ou pesadas. As leves são partículas muito finas (3 -5 μm) que são arrastadas pelos gases durante o processo (Oka, 2004; Basu, 2006; Rohde e Machado, 2016).O uso de resíduos industriais e orgânicos como materiais alternativos, de baixo custo, para o tratamento de efluentes tem se tornado bastante comum (Kunz e Peralta-Zamora, 2002). Tais resíduos podem ser utilizados para o tratamento de efluentes têxteis.As indústrias têxteis geram efluentes em grandes volumes e com um alto potencial contaminante (Cardoso, 2010). A presença de corantes sintéticos nos corpos hídricos, além da