This article offers a critical review of the research on moral and environmental education as a basis for building environmentalism. The review’s objective is to present an ideological and philosophical theory and research on environmentalism through moral education. The bulk of this research involves empirical research that examines the correlation between moral education and environmentalism, ideologies produced by moral education, and philosophical arguments inherent in environmental education. A deductive argument is made following the review of the existing research on moral education to highlight the educational approaches that have been hailed as effective. Some of the environmental educational approaches identified as being effective include proactive environmental education, creating an environmentally conscious environment, and real-life environmental education simulations. The research also identifies moral education whose focus is the creation of a moral consciousness among learners as being critical for the development of environmental consciousness. Inculcation of religious education, creating a moral educational atmosphere, moral leadership, moral life simulations, and use of Ubuntu and Ukamu theoretical frameworks will bolster building a moral consciousness among learners. The argument presented in this article is that despite the existence of some contrary research, moral education can act as a bolster to positive attitudes, actions, and behaviors towards the environment.
Burnt clay bricks are one of the most important building units worldwide, are easy and cheap to make, and are readily available. However, the utilization of fertile clay in the production of burnt clay bricks is also one of the causes of environmental pollution because of the emission of greenhouse gases from industrial kilns during the large-scale burning process. Therefore, there is a need to develop a new class of building units (bricks) incorporating recycled industrial waste, leading toward sustainable construction by a reduction in the environmental overburden. This research aimed to explore the potential of untreated coal ash for the manufacturing of building units (coal ash unburnt bricks). Coal ash unburnt bricks were manufactured at an industrial brick plant by applying a pre-form pressure of 3 MPa and later curing them via water sprinkling in a control shed. Various proportions of coal ash (i.e., 30, 35, 40, 45, 50, and 55%) were employed to investigate the mechanical and durability-related properties of the resulting bricks, then they were compared with conventional burnt clay bricks. Compressive strength, flexural strength, an initial rate of water absorption, efflorescence, microstructural analysis via scanning electron microscopy, and cost analysis were conducted. The results of the compressive strength tests revealed that the compressive strength of coal ash unburnt brick decreased with an increase in the content of coal ash; however, up to a 45% proportion of coal ash, the minimum required compressive strength specified by ASTM C62 and local building codes was satisfied. Furthermore, bricks incorporating up to 45% of coal ash also satisfied the ASTM C62 requirements for water absorption. Coal ash unburnt bricks are lighter in weight owing to their porous developed microstructure. The cost analysis showed that the utilization of untreated, locally available coal ash in brick production leads us on the path toward more economical and sustainable building units.
To provide sustainable reinforced concrete deep beams, the replacement of steel rebars by FRP rebars with high-chemical resistance is proposed by researchers. However, the effects of the concrete strength, top and web longitudinal reinforcements, and types of FRP flexural rebars on the non-linear performance of concrete deep beams have rarely been evaluated. This study numerically assessed the effects of the top and web longitudinal reinforcements and concrete strength on the non-linear behaviour of GFRP- and CFRP-strengthened concrete deep beams with various shear span-to-overall depth (a/h) ratios. As per the results, the highest tensile stress was obtained for the steel reinforcement, and the tensile stress in the CFRP reinforcement was more than that of the GFRP reinforcement under the failure load. Meanwhile, the results of high- and normal-strength concrete deep beams with the web reinforcement (16.4%) were lower than those without the web reinforcement (22.3%). Therefore, the web reinforcement moderately compensated for the low strength of normal concrete and the absence of the top longitudinal rebar to reinforce concrete deep beams in carrying the ultimate load. Furthermore, the participation of the GFRP reinforcement with the high-strength concrete was more than that with the normal-strength concrete in carrying a higher amount of loading.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.